522286
16
Zoom out
Zoom in
Previous page
1/28
Next page
offered by Busse-Yachtshop.com
Using the 300TX
Actual depth capability depends on factors such as bottom hardness, water conditions,
and transducer installation. Units will typically read to deeper depths in fresh water than
in salt water.
Simulator Operation
The 300TX contains a simulator that allows you to use the unit
as if you are on the water. The simulator is invaluable for
learning how to operate the 300TX.
There are two ways to start the simulator. If the unit is powered
off, press and hold the POWER button for approximately three
seconds until you hear a continuous chirp.
The simulator can also be started by selecting the Simulator option on the start-up
screen, after you power-up the unit. When this screen is shown, simply press the
DOWN ARROW until “Simulator” is highlighted. When the screen times out, the unit will
be in simulator mode. When the screen times out, the unit will be in simulator mode.
When in simulator operation, the 300TX responds to control inputs as if it is in actual
operation, so feel free to experiment, or to customize the unit for your particular
operation.
To exit Simulator mode, power the unit off.
When in simulator mode, the word “simulator” occasionally scrolls across the
display indicating the information on-screen is not real sonar data.
Feature Memory
If your 300TX is installed with a transducer connected, any changes you make to the
set-up or User Options (see Control Functions) while in Simulator are retained in the
unit’s memory. This allows you to use simulator to experiment with the various set-up
options, and retain your selected settings for normal operation.
If you are using the 300TX in Simulator when no transducer is connected, any selected
options are lost when the unit is powered off. The 300TX will return to Factory Settings,
or options selected when last used with a transducer, if no transducer is connected.
IMPORTANT: A transducer must be connected to the 300TX in order to retain user
settings selected when in simulator mode. If no transducer is detected, the unit defaults
to pre-selected options when powered off.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird 350TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird 350TX in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info