522282
19
Zoom out
Zoom in
Previous page
1/43
Next page
offered by Busse-Yachtshop.com
USING THE 200DXUSING THE 200DX
WHAT YOU SEE ON-SCREEN
If you are using the 200DX in Simulator when no transducer is connected, any selected
options are lost when the unit is powered off. The 200DX will return to Factory Settings,
or options selected when last used with a transducer, if no transducer is connected.
IMPORTANT: A transducer must be connected to the 200DX in order to retain user
settings selected when in simulator mode. If no transducer is detected the unit defaults
to pre-selected options when powered off.
What You See On-Screen
Your 200DX uses a 128 x 64 matrix FSTN LCD display.
This display provides outstanding viewability in all light
conditions over a wide range of temperatures.
At initial power-up, the 200DX uses settings that were set at
the factory. After initial use the 200DX will remember the
settings you enter.
Them are several elements on-screen that are common to
all modes of operation.
Temperature/Speed. The initial screen layout takes one of two basic forms depending
on whether the optional Temp/Speed accessory is installed. Figure A shows the default
view when the Temp/Speed accessory is installed. Figure B shows the default view
when the Temp/Speed accessory is not installed.
Depth. The digital depth number shows the water depth directly beneath the transducer
location.
Depth Range. The depth range is shown to the right of the screen. The upper number
is 0 indicating the surface of the water. The lower number is one of the nine depth
ranges available that best matches the depth of the water. As the depth of the water
changes the range changes as necessary in order to retain a bottom representation on-
screen.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird 200DX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird 200DX in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info