604918
23
Zoom out
Zoom in
Previous page
1/38
Next page
GB22
Settings
PVR Settings
Press the HOME button. Select SETTINGS and then PVR Settings.
IP EPG
Set to On to enjoy advanced EPG services over the Internet.
Remote Recording
You can set up recordings on your HUMAX product from your PC or mobile
devices.
To use this feature, you need to register your product in the website.
1. Go to myhumax.net and create an account and register your receiver.
2. To register your receiver, you need a registration code for certification. Select
Retrieve Registration Code and press the OK button.
3. Enter the registration code in the website.
Note: IP EPG menu must be set to On to use Remote Recording.
Recording Options
You can set the recording padding time to add extra recording time to the start
and end.
Playback Options
• Series Play: Set to On to play back all episodes of a programme successively.
• Instant Replay Time: Select the replay time.
• Skip Forward Time: Select the skip time.
Storage
You can check the capacity of each storage or format the storage when
necessary.
• Internal HDD: Run the HDD test or format the storage.
• External Devices: To remove the storage, select Remove Storage Safely first.
Note: All data in the storage will be deleted after formatting.
System Settings
Press the HOME button. Select SETTINGS and then System Settings.
System Information
You can view the system information. Select CHECK NEW SOFTWARE to see if
new software is available.
Power Timer
You can set the time the product powers on or powers off.
Power Management
• Automatic Power Down: Select On to enter standby mode automatically if
no user interaction occurs for 3 hours.
Power Saving in Standby: Select On to inactivate certain functions and
reduce the power consumption in standby to below 0.5W.
Note: A message will display 2 minutes before the product enters standby mode. If
you ignore this message, the product enters standby mode automatically.
Factory Default
You can restore your receiver to factory settings.
Shortly after you complete the factory default, the installation wizard will
appear automatically.
Warning: Note that once you perform factory default, all user configured data will
be reset. Shortly after you complete the factory default, the installation
wizard will appear automatically.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax HMS-1000T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax HMS-1000T in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info