604916
28
Zoom out
Zoom in
Previous page
1/39
Next page
AU28
Installation
Regular Update
You can set the software update to take place automatically at 4a.m. on a daily basis.
1. Select Regular Update.
2. Select an option.
On: Software is updated automatically at 4a.m.
O: No automatic software update
The EPG information for certain channels is updated daily at 4:00 a.m. except when there is Regular Update or
when there is a scheduled recording between 4-5a.m.
Caution:
Please be careful to keep the power on and the power cord plugged in during software update. If the power is
off during software update, fatal damage may be caused to the product.
Software update through the network is also possible if you access HUMAX TV Portal.
Note:
New software is downloaded and installed only when the network is connected via LAN.
It may take approximately 40 minutes to update software.
Other functions such as scheduling programmes will not activate while software update takes place.
If new software is detected, you can choose either to download immediately or later. If you select Later, the
message will be displayed again when you switch into standby mode.
You can also update the software by connecting a USB device which has the new software file. The file can be
downloaded from the HUMAX website.
Software Upgrade via USB Memory Stick
1. Visit HUMAX Australia website (www.humaxdigital.com/au) and go to Support>Software Download.
2. Check the latest software version and click the title to commence download and save it to an EMPTY USB
memory stick (Make sure you have no other files).
3. Power off the receiver by switching off the switch located on the rear.
4. Insert the USB memory stick into the USB port (located at the rear) of the receiver.
5. Power on the receiver by switching on the switch located on the rear and immediately start tapping the front
Standby touch button until the letter R appears on the front display.
6. The front display will change to P and numbers will show indicating the progress. (You can also monitor the
progress on the TV screen connected to the receiver.)
7. When the front display changes to END, pull out the USB memory stick.
8. To confirm successful update, please go to Menu>System>System Information and check Software Version.
Note: If the download progress stops around 89%, it may take up to 5 minutes for it to restart. DO NOT TURN OFF the
receiver at this point.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax HDR-7510T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax HDR-7510T in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info