604894
17
Zoom out
Zoom in
Previous page
1/119
Next page
GB16
User’s Manual
2. Connections
This chapter describes how to connect your product to the TV with the particular equipments for gaining
optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other
devices. Select the most appropriate procedure depending on the equipment you have.
Note: If you encounter any problems setting up your product, please contact your local retailer or Humax
Customer Helpline.
2.1 Connecting the Antenna
You can select one of the following antenna connections depending on the equipment you have. The
product has two antenna modes according to setting.
Change this to the  rst option.
1. Connecting Two Satellite Cables
Connect the two cables from your satellite dish to the LNB 1 IN and
LNB 2 IN connections on the rear of the product.
Note: To maximize the use of all PVR features FOXSAT-
HDR provides, connecting with two cables from
the same satellite dish is strongly recommended.
This will allow you to:
View and record di erent channels
Record two channels at the same time
2. Single Cable Using Loop Through
1. Connect the cable from your satellite dish to LNB 1.
2. Connect a cable from the LNB 1 OUT to the LNB 2 IN connection.
Note:
If connecting with a single cable using loop through, you will
have limited functionality.
While recording a channel you will be limited to the second
channel you can view.
Visit www.humaxdigital.com/freesat for further information.
When using a Motorised System, SCD Antenna (also known as
Unicable), or SMATV please connect the cable to LNB 1.
ASTRA 1 19.2E
Twin LNB
ASTRA 1 19.2E
Single LNB
17


Need help? Post your question in this forum.

Forumrules
1

Forum

humax-foxsat-hdr

Reset search

  • Is it possible to change the colour of the TV channel guide?
    It’s currently white on grey and quite difficult to read! Submitted on 16-4-2022 at 12:55

    Reply Report abuse
  • is it possable to link recodings to record all episodes of a program Submitted on 6-3-2022 at 17:38

    Reply Report abuse
  • Can you record i channel and watch another channel Submitted on 9-2-2022 at 20:51

    Reply Report abuse
  • Can you watch one channel and record another channel Submitted on 9-2-2022 at 20:49

    Reply Report abuse
  • Hi, the humax cannot find signal which has a symbol rate of 45000. I have tried 10981 V 45000 Submitted on 4-2-2022 at 09:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax FOXSAT-HDR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax FOXSAT-HDR in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info