604894

Humax FOXSAT-HDR Manual

2
Zoom out
Zoom in
Previous page
1/119
Next page
GB1
User’s Manual
Notice
Thank you for purchasing a Humax Foxsat-HDR
(Digital Television Recorder) Your Foxsat-HDR supports
freesat+ provided by the freesat service.
Freesat+ explained:
• Accurate Recording – the product will track the start and end times of scheduled recordings meaning
the recording will start and stop at the times sent by the broadcasters. If a programme starts early or
runs late the record time will automatically be adjusted to record the whole programme*.
• Series Recording – if a programme you wish to record is in a series, you can now record the whole
series.
• Schedule Tracking - If the programme changes to a di erent time or day the changes will be detected
and the programme will still record.
• Alternate Instances - if a scheduled recording(s) overlap with other programmes already set to
record, you will be given the option to record one of the programmes if it is repeated.
• Split Recordings - if a programme has two parts split by another programme in the Guide (e.g. a  lm
divided in to two parts by a News programme) both parts will record.
Note: The above freesat+ features are available on channels where the correct and accurate data is being
broadcast. Some channels may not support some/all services.
Accurate recording is only available when the Record > Early Start Time & Late End Time options are set
to On Time.
2 …


Need help? Post your question in this forum.

Forumrules
1

Forum

humax-foxsat-hdr

Reset search

  • Is it possible to change the colour of the TV channel guide?
    It’s currently white on grey and quite difficult to read! Submitted on 16-4-2022 at 12:55

    Reply Report abuse

  • is it possable to link recodings to record all episodes of a program Submitted on 6-3-2022 at 17:38

    Reply Report abuse

  • Can you record i channel and watch another channel Submitted on 9-2-2022 at 20:51

    Reply Report abuse

  • Can you watch one channel and record another channel Submitted on 9-2-2022 at 20:49

    Reply Report abuse

  • Hi, the humax cannot find signal which has a symbol rate of 45000. I have tried 10981 V 45000 Submitted on 4-2-2022 at 09:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax FOXSAT-HDR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax FOXSAT-HDR in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info