554051
15
Zoom out
Zoom in
Previous page
1/44
Next page
You can also increase high or low frequen-
cies by using the sound control (slide switch
onthefront,seegure1).
Note:
The sound control is only functional if the
amplicationisswitchedon.
Figure 1:
Sound control/volume adjustment
Switch to adjust the volume reset
Settings can be made on your phone so that
the volume will be reset to the basic settings
once the telephone receiver is hung up.
This means that persons, who do not need
amplication, can use the phone without
risks to their hearing due to a high volume.
For normal mode, the switch on the back
of the equipment will be set to "OFF".
If you are the only user of the phone or if
you would like to deactivate the reset func-
tion, slide the switch on the back of the
equipment to the "ON" position. The adjust-
ed volume will not be reset if the telephone
receiver is hung up and your adjustments
are available for the next phone call.
Use of the phone with a hearing aid
You can use your phone with hearing aids,
assumed they are equipped with a T-coil.
For this purpose. place the selector switch
at your hearing aid to the "T" or "MT" po-
sition. Please ensure that the telephone re-
ceiver will be placed as close as possible to
your hearing aid during a phone call.
Muting
You can switch the microphone of your
phone temporarily off during a call, which
means that your conversational partner can
no longer hear you.
"Mute" will be displayed in the lower left
screen area of the display during a call.
The muting function will be activated when
pressing the left function key. The function
will be deactivated when pressing the key
again.
Hold
You can put a phone call on hold.
"Hold" will be displayed in the lower right
screen area of the display during a call. The
hold function will be activated when press-
ing the left function key. The function will be
deactivated when pressing the key again.
Insert dial break (PABX)
The dialing mode will be interrupted for a set
time by pressing the
/P
key.
Call back key (
R
)
This function is required to activate certain
T-NET performance features.
By pressing the
R
key, the phone line will
be disconnected for a certain time (100ms/
120ms/ 300ms/ 600ms) (see "Setup of the
call back time").
English 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK Scalla 3 combo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK Scalla 3 combo in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HUMANTECHNIK Scalla 3 combo

HUMANTECHNIK Scalla 3 combo User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info