Manual HUMANTECHNIK A-4202-0 CRESCENDO 50 (page 10 of 40) (English, German, Dutch, French, Italian, Spanish)

565185

Zoom out

Zoom in

1/40

Signal reception

Acoustic signals can be picked up by the ampliﬁer in four different ways:

1. The acoustic signals are picked up by the built-in microphone, whereby the

operating mode selector in the battery compartment must be set to

»M« (factory default setting for the

Crescendo 50

2. Acoustic signals from television sets or other audio devices can be picked

up by the plug-in microphone included with the system. Simply plug this

microphone into the microphone jack. (If an external microphone is used, the

built-in microphone will be switched off automatically.) In addition, the opera-

ting mode selector in the battery compartment must be set to »M«.

3. Audio signals can also be picked up by a stereo/audio cable. In this case,

the operating mode selector in the battery compartment must be set to »A«.

Connect the audio cable with the

Crescendo 50

and the audio source (e.g.

television set).

4. To pick up signals from an induction loop system, the operating mode selec-

tor in the battery compartment must be set to »T«. Please note that any

microphone connected must be disconnected ﬁrst.

Switching the device on

To switch the ampliﬁer on, turn the volume knob clockwise until you click past a

noticeable resistance. The ON/OFF indicator will light up to show you that the

device has been switched on.

Setting the volume/tone

Adjust the volume control to set the device to the volume you prefer. Use the tre-

ble/bass control knob to adjust the tone; the treble and the bass will be increa-

sed accordingly.

Switching the device off

To switch the ampliﬁer off, turn the volume knob counter-clockwise until you click

past a noticeable resistance. The green ON/OFF indicator will switch off.

10 English

crescendo_50:BA_cresc_190707 13.02.2009 12:30 Seite 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-4202-0 CRESCENDO 50 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-4202-0 CRESCENDO 50 Manual

Product: