Manual HUMANTECHNIK A-2500-0 visuTone (page 7 of 48) (English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Norwegian)

565125

Zoom out

Zoom in

1/48

English 7

Congratulations on purchasing your visuTone.

You have chosen a modern and reliable sys-

tem. Please read through these operating in-

structions carefully. They tell you how to set

up the system correctly and explain all the

system’s features to you.

Standard componets

Please check if all following components are

included:

- visuTone

- 4 Batteries (Mignon, AA, LR06)

- Telephone cable, length 5 m

- Sensor cable, length 5 m

- Operating instructions

- Warranty card

If any parts are missing, please immediately

contact your dealer or the manufacturer di-

rectly.

Operating principle

The visuTone picks up the ringing signals

from your telephone or doorbell through an

electrical connection and converts these

signals into acustic and optical signals.

1. Inserting the batteries

You will ﬁnd a battery compartment on the

rear side of the visuTone. Open it by gently

pressing the small clip against the battery

compartment lid with your thumb and then

lift it up. Now insert the four batteries that

came with the device into the compartment,

making sure that plus is matched with

plus and minus with minus! Replace the

lid on the compartment.

2a. Installing the telephone cable

Plug the end of the cable with the transpar-

ent clip-in connector (6-pin plug) into the

socket on the underside of the visuTone.

Plug the other end into a space telephone

socket.

If you use the telephone cable, the telephone/

sensor selector on the underside of the visu-

Tone must be set to .

Important

Please only use the telephone cable supplied

with the unit, otherwise proper function can-

not be guaranteed. The visuTone is designed

to be connected to an analog telephone sys-

tem.

2b. Installation of the sensor cable

Use the adhesive ring to afﬁx the sensor

disk to the sound emission opening on your

doorbell and insert the sensor cable into

the connection jack on the underside of the

visuTone. To do so, make sure to remove the

protective ﬁlm over the adhesive ring on the

sensor disk ﬁrst.

If you use the sensor cable, the telephone/

sensor selector on the underside of the visu-

Tone must be set to To ensure that the

visuTone functions properly, the sensitivity

control dial must be set so that the sensor

reacts to the signal promptly.

Note

You can use the visuTone to either indicate

a ring at the doorbell or a ring of the tele-

phone. The visuTone is not able to process

and indicate both signals at the same time.

3. ON-/OFF switch

Set the ON-/OFF switch to „ON“. The visuTo-

ne is now ready to operate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2500-0 visuTone in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2500-0 visuTone Manual

Product: