Manual HUMANTECHNIK A-2469-0 (page 10 of 40) (English, German, Dutch, French, Italian, Spanish)

565075

Zoom out

Zoom in

1/40

10 English

The infrared motion transmitter can

detect movement at a maximum

distance of up to 6 meters away.

The opening angle measures approx.

35° to 40°.

Please note the following when set

ting up the infrared motion transmit-

ter:

1. The infrared reception sensor

must be free and clear.

2. The maximum infrared recognition

range must be observed.

Switching on the infrared motion

transmitter

Use the slider switch on the right-

hand side of the device to switch the

transmitter on.

There are two ways to activate the

infrared reception sensor:

1. Switch on the Alarm ON/OFF

switch on the bottom of the trans-

mitter (switch pressed in = IR

motion transmitter is activated).

2. Use an external ON/OFF switch.

Once the transmitter has been

activated, the infrared reception

sensor takes about 30 seconds to

switch on to give you time to leave

the alarm area. If a person or animal

comes within the recognition range

of the infrared motion sensor, an

alarm signal will sound.

are picked up without errors. This

process also makes it possible to set

10 different radio channels.

When supplied from the factory, all

Infrared motion transmitters are set

to channel 0. It is only necessary to

set units to other channels if you

have several different users opera-

ting units in the same building.

Set the channel you want by adju-

sting the channel selector switch on

the left-hand side of the unit to the

required channel number. Use a

small screwdriver to adjust this

switch.

All transmitters and receivers must

be set to the same channel.

4. Installation of the infrared

motion transmitter

➡

Fig. setting the correct radio channel

max. 6 m

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2469-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2469-0 Manual

Product: