Manual HUMANTECHNIK A-2464-0 (page 10 of 40) (English, German, Dutch, French, Italian, Spanish)

565063

Zoom out

Zoom in

1/40

Set the required channel by using a

small screwdriver to turn the channel

selector switch, which is located

towards the top of the battery com-

partment, to the required channel

number.

All transmitters and receivers must

be set to the same channel.

Fig. setting the correct radio channel.

3. Installing the microphone cable

Use the adhesive ring to glue the

microphone to the ringer cover of

your telephone and plug the micro-

phone cable into the connection jack

on the bottom of the RF telephone

transmitter acoustic. To do this, pull

off the backing foil from the adhesive

ring on the microphone.

For optimum function of the transmit-

ter, its sensitivity dial switch must be

set so the transmitter reliably res-

ponds to the doorbell.

Pulling off the backing foil.

10 English

Fig.: Plugging in the microphone

cable and sticking the microphone

over the acoustic output cover of

your doorbell.

4. Setting the sensitivity

Set the ringer of your telephone to its

maximum volume. Set the sensitivity

of the RF telephone transmitter acou-

stic to its lowest level (turn to the

anticlockwise stop).

Activate the telephone ringer and

gradually increase the sensitivity of

the transmitter (by turning the dial

clockwise) until the transmitter reacts

to the telephone ringing.

Please note:

It is possible that the

telephone signal may be triggered

once if you replace the telephone

handset with too much force.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2464-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2464-0 Manual

Product: