English 9
Congratulations on purchasing the
Radio Multi-Channel Transmitter. We
hope it will give you many years of
reassuring operation. Please read
through these operating instructions
carefully. They tell you how to set up
the system correctly and explain all
the system’s features to you.
Operating principle
A signalling system consists of at
least one transmitter and one recei-
ver. The Radio Multi-Channel trans-
mitter picks up the signals from
various alarm sensors. It converts
theses signals into radio pulses
(868.35 MHz) and transmits them to
the receiver without the need for
wires.
The
Radio Multi-Channel Transmitter
transmits on all 10 possible chan-
nels at the same time. Therefore it
reaches all existing lisa receivers,
even if they are set on different
channels.
Standard components
-
lisa Radio Multi-Channel Transmitter
- 9 V battery
- Operating instructions
- Warranty card
If any parts are missing, please
immediately contact your dealer or
the manufacturer directly.
Components not included
Alarm accessories
Setting up the system –
1. Inserting the battery
There is a battery compartment on
the back of the direct-connection
Radio Multi-Channel Transmitter
.
Open it by sliding the cover of the
battery compartment to the right of
the transmitter using your thumb.
Plug the terminals of a 9 V battery
into the connection adapter. Insert
the battery into the compartment
and fit the cover back into place.
It is possible that the transmit signal
may be triggered once when you
connect the battery.
2.
Installing the alarm accessories
Plug the alarm accessories into the
socket on the underside of the Radio
Multi-Channel Transmitter.
This socket is identified by a triangle
framing an exclamation mark:
!
