565087

HUMANTECHNIK A-2416-0 Manual

11
Zoom out
Zoom in
Previous page
1/52
Next page
Setting up the system
1a. Inserting the battery
There is a battery compartment on
the back of the
RF blink lamp
. Open
it by sliding the cover of the battery
compartment to the right of the recei-
ver using your thumb. Connect a 9 V
block battery to the connector plug,
insert the battery into the battery
compartment and close the device.
When the battery is connected, the
receiving signals may be triggered
once.
1b. Operation with a rechargeable
battery (A-2995-0)
The
RF blink lamp
can also be operated
using a rechargeable battery (A-2995-0),
which is available as a special acces-
sory.
Open it by sliding the cover of
the battery compartment to the right
of the receiver using your thumb.
To connect the rechargeable battery,
insert the battery plug into the outlet
in the battery compartment.
English 11
Congratulations on purchasing your
RF blink lamp
. We hope it will give
you many years of reassuring opera-
tion. You have purchased a modern
and reliable system.
Please read through these operating
instructions carefully. They tell you
how to set up the system correctly
and explain all the system’s features
to you.
Standard components
Please check if all following compo-
nents are included:
-
RF blink lamp
- 9 V block battery
- 9 V plug-in PSU
- Stand
- Operating Instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Functional principle
The
RF blink lamp
receives signals
from a variety of radio transmitters
and converts them into light signals.
The
RF blink lamp
has a very high-
power light-emitting diode (LED),
which brings a signal to the user's
attention, and additional LEDs which
indicate the nature of the incoming
signals.
9 Volt
rechargeable
battery
Funkblinklampe_1108:BA_Akku_Funkblinklamp_D 24.11.2008 13:37 S
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2416-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2416-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info