565120

HUMANTECHNIK A-2031-0 Manual

9
Zoom out
Zoom in
Previous page
1/36
Next page
To select a channel, turn the rotary
switch on the underside of the trans-
mitter to the required channel number
using a small screwdriver.
Example:
Set channel
number 0
Personal Call button
Pressing this button causes a certain
flash sequence on each receiver. It is
possible to call people in other rooms
this way. This button also allows the
lisa system to be tested without any
connecting cables.
Duration of flashing signals
The factory setting for the duration of
the flash is 28 seconds for all lisa
receivers. However, you can reduce
this to 8 seconds if you wish. To chan-
ge the flash duration for a particular
transmitter, remove the transmitter
from the mains socket and, while
pressing in the personal call button,
plug the transmitter back into the sok-
ket. To switch back to 28 seconds
remove the transmitter from the sok-
ket and plug back in again this time
without pressing the personal call
button.
Doorbell connection
Plug the transmitter into a convenient
mains socket. Plug the doorbell
microphone lead into the respective
English 9
Congratulations on purchasing the
lisa combi II. We hope it will give you
many years of reassuring operation.
Please read through these operating
instructions carefully. They tell you
how to set up the system correctly
and explain all the system’s features
to you.
Standard components
Please check if all following compo-
nents are included:
- combi II
- Operating instructions
- Warranty card
l
l
i
i
s
s
a
a
system introduction
An alerting system requires at least
one transmitter and a receiver. The
transmitter captures sound signals
and transforms them into digital sig-
nals that are passed to a receiver by
the existing mains electricity supply.
The receiver then transforms these
digital signals into light signals.
Channel selection
A digital transmission system ensures
the correct recognition of each of the
digital signals from each transmitter.
The system has 10 different selec-
table channels, 0-9.
The factory setting for all lisa devices
is channel 0. Only where more than
one installation is required in the
same building will it be necessary to
select a different channel for each
system.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2031-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2031-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info