Manual HUMANTECHNIK A-2025-0 (page 10 of 36) (English, German, Dutch, French, Italian, Spanish)

565114

Zoom out

Zoom in

1/36

Doorbell connection

Plug the transmitter into a convenient

mains socket. Plug the 2.5 mm cinch

plug of the doorbell cable into the

socket at the underside of the trans-

mitter. Lay the cable to the bell push

or door chime. Connect both wires to

the screw contacts of the bell push or

door chime.

Warning:

The transmitter is only

desig ned to work with low voltage

doorbells. Do not connect the thin

doorbell cable to the mains supply.

This could be extremely dangerous

for the user and may destroy the

transmitter. The doorbell voltage must

be at least 3 Volts and must not

exceed 15 Volts. Both AC and DC can

be used. Pressing your doorbell will

now cause each receiver to flash with

the corresponding number of flashes.

A second doorbell may be connected

into the remaining doorbell socket.

The receiver will flash differently for

doorbell 1 and doorbell 2.

Failure causes

- You did not press the doorbell for

long enough. Ring the bell for longer.

- If your doorbell system uses direct

current voltage, you have not con-

nected the wires with the correct

polarity. Swap over the wires.

- The doorbell voltage of your system

is too low. Either contact an electri-

cian to have the doorbell system

converted or use the doorbell

transmitter acoustic.

Important note

All

lisa

devices connected to the

mains supply have a low power con-

sumption which may lead to the devi-

ce feeling warm. This is normal and

does not interfere with the normal

function of the devices.

These signalling systems have a high

operational safety. Should any faults

occur in spite of proper installation

and use, please contact your dealer.

High and low voltage spikes (e.g.

during a thunderstorm) can occur on

the mains supply. The

lisa

devices

have an integrated electronic control-

ler which may stop working after

these conditions. If this happens sim-

ply unplug each of the devices and

plug them in again.

As a precaution remove all de vices

from their sockets during a thun-

derstorm.

The use of halogen lamps or other

equipment (e.g. Micro wave Ovens)

may, in rare cases, interfere with the

lisa

signals. In these cases the use of

mains filters or suppressors is advisa-

ble. Please ask your dealer.

Maintenance and care

All

lisa

devices are maintenance free.

To clean, remove from their mains

sockets and wipe over with a moiste-

ned cloth. Never use alcohol, thinner

or other organic materials.

lisa

devices should not be exposed to

excessive direct sunlight, heat, thick

dust, humidity or mechanical shock.

10 English

TuerGal_lisaKlein_1108:BA_TuerGal_lisaKlein.qxd 24.11.2008 13:4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2025-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2025-0 Manual

Product: