Manual Hudora 14150 (page 7 of 24) (English, German, Dutch, French, Italian, Spanish)

803095

Zoom out

Zoom in

1/24

7/24

• Pull the lever (to the right above the running board) in order to loosen

the assembly lock.

• Fold the scooter by first turning the handlebar 180° (with the HUDORA

logo pointing downwards) and then moving it towards the rear wheel

until the transport lock audibly engages. (Picture 6)

• Picture 7 shows the folded scooter.

USAGE INSTRUCTIONS

NOTHING’S EASY AT FIRST …

... most accidents happen to “beginners” within the first ten minutes.

Particular care should be taken during this stage.

DRIVING INSTRUCTIONS

The scooter moves when a foot is used to regularly push off, just as with

well-known children’s scooters. Braking is no problem either - simply

step on the friction brake over the back wheel (mudguard).

We recommend folding the scooter by hand after each use or using the

stand. The side stand is in the direction of movement located on the left

hand side under the deck. Its use is ensured through simply folding and

unfolding. Aluminium is a good and light material but should also be

handled carefully as it is not as hard as steel, for example.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special

cleaning agents! Check the product for damage or traces of wear and tear

before and after each use. Do not make any structural changes. For your

own safety, please use original spare parts only. These can be sourced

from HUDORA. If parts become damaged or if sharp edges or corners

should develop, the product may not be used any more. If in any doubt,

please contact our service team (http://www.hudora.de/). Store the prod-

uct in a safe place where it is protected from the elements, cannot be

damaged, and cannot injure anyone.

Replace damaged or worn assembly parts in order to ensure the safety

of your scooter.

WHEEL CHANGE

Replacement wheels are available as accessories from http://www.

hudora.de/ and should be replaced when they are worn down. To change

the wheels, loosen the axle fitting with two Allen keys and take the wheels

off the axle. A screwdriver or Allen key can be used to push the bearings

out of the wheel to use them in the new wheel. However, it is usually

advisable to change the bearings when the wheels are changed. Put the

bearings into the new wheel with the bolt spacer and mount them to the

frame with the axle screws. Make sure the axle has been screwed on

tightly before starting again!

BEARINGS

Your kick scooter is equipped with precision ball bearings, which were

filled with grease under high pressure, during manufacture. For this rea-

son, the rollers of the kick scooter only run lightly and swiftly, while under

load. Bearings are maintenance-free, but they are wear parts. Caution!

Worn bearings make conspicuous audible noises and their function is

constrained. In order to maintain optimal riding pleasure and to ensure

lasting safety, you should replace bearings, as soon as they begin to ex-

hibit signs of being worn. In the case of full load and daily use we recom-

mend the replacement of the rollers and bearings twice a year. Bearings

are available as accessories under http://www.hudora.de/.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate col-

lection point provided in your area. Local waste management companies

will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise how-

ever, we put just as much effort into rectifying them. Therefore, you can

find numerous information on the product, replacement parts, solutions to

problems and lost assembly manuals at http://www.hudora.de/.

All images are examples of the design.

SPARE PARTS AND ORIGINAL

ACCESSORIES AVAILABLE AT:

http://www.hudora.de/

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hudora 14150 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hudora 14150 Manual

Product: