647686

Huawei WS325 Manual

57
Zoom out
Zoom in
Previous page
1/74
Next page
6 Configuring Frequently Used Functions
WS325 300Mbps Wireless Router
User Guide
6-26 Issue 01 (2012-10-26)
When configuring the WDS function, you should comply with the following principles:
Both wireless routers should support the WDS function.
The WDS function should be enabled on both wireless routers.
On each router, add the wireless MAC address of the peer router to the WDS MAC
list. No WDS MAC list is required to be configured on the router in lazy mode but a
WDS MAC list should be configured on the peer router.
The settings of the following parameters on both wireless routers should be the same:
− Wireless channel
− Encryption mode
− Encryption password
The security modes set on the two wireless routers can be different but the encryption
modes should be the same.
The SSIDs of the two WLANs can be different but it is recommended that the two WLANs
use the same SSID. Thus, wireless terminals can use one SSID to connect to the WLAN
that is expanded.
If the repeater mode is used for expanding the coverage of a WLAN, note that:
− The IP addresses of the LAN interfaces of the two routers should be in the same
network segment. In addition, the IP addresses should be different.
− Enable the DHCP server function only on the wireless router that is used to
connect to uplink devices. Disable the DHCP function and enable the DHCP
relay function on other wireless routers.
Configuration Example
For example, you have router A in your spacious house. The signals of router A cannot
cover the area that is far from the router. In this case, you can add another router, that is,
router B. By configuring the WDS function on the two routers, you can expand the
coverage of a WLAN.
The parameters of the routers are planned as follows:
Router A:
Set the IP address of the LAN interface to 192.168.3.1 (default value).
Set the subnet mask of the LAN interface to 255.255.255.0 (default value).
Enable the DHCP server function (default value).
Select SSID1 for SSID (default value).
Set the name of SSID1 to mySSID.
Set the WLAN channel to 1.
The WLAN encryption settings are as follows:
− Set the security mode to WPA-PSK/WPA2-PSK.
− Set the encryption mode to AES.
− Set the password used for accessing the WLAN to MyPassword@2012.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huawei WS325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huawei WS325 in the language / languages: English as an attachment in your email.

The manual is 9,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info