Manual Huawei WiFi Mesh 7 (page 102 of 115) (English, German, Dutch, French, Italian, Portuguese, Spanish)

787459

102

Zoom out

Zoom in

1/115

Quick Start Guide

Contents

Quick Start Guide ................................................... 1

Quick Start Guide................................................. 15

Guide de démarrage rapide.................................... 29

Schnellstartanleitung............................................. 43

Guida rapida ....................................................... 57

Snelstartgids ....................................................... 71

Guia de início rápido ............................................. 85

Guía de inicio rápido .............................................99

Quick Start Guide

Getting Started

3RESET button

WAN/LAN auto-adaptation port: Connects to the Internet

(such as optical modem, broadband modems, etc.) and

wired network device such as a computer.

Power port

H button

Scan the QR code to download and install the HUAWEI AI Life

App on your mobile phone or tablet. You can use the app to

manage your router.

Step 1: Install the app

If the app is already installed on your

phone, make sure you have the latest

version of the app.

POWER 2

RESET

WAN/LAN

POWER

LA N

ADSL

RESET

LAN WAN

POWER 2

RESET

WAN/LAN

Internet

Step 2: Connect the cables

Take out a router from HUAWEI WiFi Mesh 7, connect it to the

optical/broadband/cable modem using a network cable, then

connect it to a power supply.

Optical/broadband/cable modem

(from your broadband provider)

Router

Insert the cable to the WAN/LAN

auto-adaptation port on the router

Internet

• If the indicator is steady red, this indicates that the router is not

connected to the Internet. Please refer to "Step 3: Set up the router".

• For routers that support WAN/LAN auto-adaptation, the network ports

are WAN/LAN combo ports. You can also specify a xed WAN port

on the router's web-based management page.

Step 3: Set up the router

Method 1: Congure the router on the app

Connect your mobile phone to the Wi-Fi

® of the router

connected to the modem (no password required). Check for

the Wi-Fi name on the bottom of the router.

WiFi

Connected Wi-Fi Name: XXXXXX

Open the app. After the app has detected the router, touch

CONFIGURE.

If the prompt box does not appear,

touch +.

CONFIGURE

LATER

Touch GET STARTED.

GET STARTED

4Enter your broadband account and password.

If your Internet connection does not require an account and

password, please skip to the next step.

VLAN

Broadband account

Broadband password

CONNECT

If you need to congure VLAN on

your network, contact your broadband

carrier to conrm the VLAN

parameters, and enable the VLAN

switch on the screen.

Internet access wizard

Set a new Wi-Fi name, Wi-Fi password, and management

password for the new router.

...

Internet access wizard

Wi-Fi name

Wi-Fi password

Router login password

Internet access wizard Internet access wizard

Next Next

Set up Wi-Fi information

Method 2: Congure the router on the web-based

management page

Connect your mobile phone to the Wi-Fi of the router

connected to the modem (no password required). Check for

the Wi-Fi name on the bottom of the router.

2Open the browser and you will be automatically redirected

to the web-based management page (if the page is not

displayed automatically, enter "192.168.3.1" in the browser

address bar). Follow the onscreen instructions to congure

the router.

Let's get started

WiFi

Connected

Wi-Fi Name: XXXXXX

If the pack you purchased contains more than one router, the

other router(s) will set up a network with the rst congured

router automatically after being connected to the power supply.

Place the router(s) in the area where you wish to extend

Wi-Fi coverage, and connect it to a power supply. Wait for

approximately two minutes until the indicator turns steady blue,

indicating that the router is connected to the network. You can

also check their network connection through the app.

Step 4: Connect the other router(s) to the

power supply

• For best results, place the routers within 10 meters of each other

with one wall in-between at most.

• All routers share the same Wi-Fi name and password. When you

move across rooms, you will automatically connect to the faster

Wi-Fi network.

• If a router's indicator is steady red, this means that it cannot

connect to the Internet. Please refer to "Indicator - Steady red"

below for more details.

Indicator

Steady blue: Connected to the Internet.

Steady red: Not connected to the Internet.

Flashing: The router has detected a pairable device.

When other HUAWEI devices (support HarmonyOS Connect)

are detected, the indicator on the HUAWEI WiFi Mesh 7 will

ash. When this happens, touch the HUAWEI WiFi Mesh 7's

H button. The indicator should ash quickly, indicating that the

pairable device is connecting to the HUAWEI WiFi Mesh 7.

The connection process is complete when the indicator stops

ashing.

• If you touch the H button accidentally, wait for approximately

two minutes and the indicator will be back to normal

automatically.

• The H button also features WPS functionality.

For the router that is connected to the modem:

• Ensure that the Ethernet cable is not loose and connected

correctly.

• Contact your carrier to check for any network failure.

For the router(s) that is/are not connected to the modem:

• Ensure that the distance between two routers is less than 10

meters and there are no more than one wall in between.

Frequently Asked Questions (FAQs)

1. What should I do if after conguring my router, my mobile

phone automatically connects to the Wi-Fi network of the

previously connected optical/broadband/cable modem

instead of the Wi-Fi network of my router?

2. What should I do if the router is not recognized on the

app?

It is recommended that you disable the Wi-Fi network of your

previous optical/broadband/cable modem to reduce potential

signal interference with your router.

• Ensure that you have the latest version of the app.

• Ensure that your phone is connected to the Wi-Fi network

of the router that is connected to the modem and is to be

congured.

• Ensure that all routers are new or restored to factory

settings.

• Ensure that the router's power supply is well connected. Wait

until the router completes the startup process and try again.

3. What should I do if I encounter any of the following issues

during the conguration of the router?

• If your phone cannot nd the router's Wi-Fi, ensure that the

router is connected to a power supply. Wait until the router

completes the startup process. Then try searching for the

router's Wi-Fi again on your phone.

• If "Internet cable not detected" is prompted, ensure that the

Ethernet cables are well connected and in good condition.

• If "Incorrect username or password" is prompted, re-enter

your broadband account and password. If the problem

persists, contact your carrier for assistance.

4. How do I restore the router to its factory settings?

Connect the router to the power supply and wait until the

router completes the startup process. Use a needle or pin

to press the RESET button on the router for more than two

seconds until the indicator light goes out. Wait for the router

to complete the restart process. When the indicator turns red,

this indicates that the router has been restored to its factory

settings.

If the problem persists, restore the router to its factory settings

and follow the instructions in this guide to reconnect the cables

and re-congure the router.

If the congured router has been restored to factory settings,

you need to congure it again. Then restore the other router(s)

to the factory settings so that it/they can automatically connect

to the congured router.

5. How do I connect an add-on HUAWEI router to my

HUAWEI WiFi Mesh 7 to expand the Wi-Fi network?

You can connect the router in either of the following ways:

• Wired connection. Connect the WAN port of the add-on

router (new or restored to factory settings) to the LAN port

of the congured HUAWEI WiFi Mesh 7 using an Ethernet

cable.

• Wireless connection.

Step 1: Place the add-on router (new or restored to factory

settings) within one meter of the congured HUAWEI WiFi

Mesh 7 and connect it to the power supply.

Step 2: When the indicator on the HUAWEI WiFi Mesh

7 starts to ash, touch the H button on it. Wait until the

indicator on the add-on router shows it is connected to the

network.

Step 3: For broader coverage, disconnect the add-on router

6. How do I connect a Wi-Fi device to my router using WPS?

When your router is powered on, touch its H button, and then

press the WPS button on the Wi-Fi device (such as a phone)

within two minutes to initiate standard WPS negotiation and

connect the Wi-Fi device to the router's Wi-Fi network.

from its power source, then place the router within a 10 m

range of the HUAWEI WiFi Mesh 7, with no more than one

wall in between the two routers.

"HUAWEI router" refers to routers that support HarmonyOS

Mesh+. Please check if your device supports such features.

7. How do I use the NFC function of the router to quickly

connect to the Wi-Fi network?

Unlock your phone, enable NFC on it, and touch the NFC

area on the back against the NFC area on the router, then

follow the onscreen instructions to connect the phone to the

Wi-Fi network.

This feature is available on Android devices that support NFC,

but some devices with non-standard NFC may be unable to

connect. iOS devices do not support connecting through NFC.

Safety information

Operation and safety

• Do not use your device if using the device is prohibited. Do not

use the device if doing so causes danger or interference with other

electronic devices.

• Pacemaker manufacturers recommend that a minimum distance of

15 cm be maintained between a device and a pacemaker to prevent

potential interference with the pacemaker. If using a pacemaker,

hold the device on the side opposite the pacemaker and do not

carry the device in your front pocket.

• Avoid dusty, damp, or dirty environments. Avoid magnetic fields.

Using the device in these environments may result in circuit

malfunctions.

• Ideal operating temperatures are 0 °C to 40 °C. Ideal storage

temperatures are -40 °C to +70 °C. Extreme heat or cold may

damage your device or accessories.

• Keep the device and accessories in a well-ventilated and cool area

away from direct sunlight. Do not enclose or cover your device with

towels or other objects. Do not place the device in a container with

poor heat dissipation, such as a box or bag.

• The device should be installed and operated with a minimum

distance of 20 cm between the radiator and your body.

• Using an unapproved or incompatible power adapter, charger, or

battery may damage your device, shorten its lifespan, or cause a

re, explosion, or other hazards.

• For pluggable devices, the socket-outlet shall be installed near the

devices and shall be easily accessible.

• Unplug the power adapter from electrical outlets and the device

when not in use.

• Do not touch the device or the power adapter with wet hands. Doing

so may lead to short circuits, malfunctions, or electric shocks.

• For optimal Wi-Fi coverage and performance, it is recommended

that the installation distance between multiple mesh routers be

greater than 2 m when there is line of sight (LOS) Internet.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging

means that the products and batteries should be taken to

separate waste collection points designated by local authorities

at the end of the lifespan. This will ensure that EEE waste is recycled

and treated in a manner that conserves valuable materials and

protects human health and the environment.

For more information, please contact your local authorities, retailer, or

household waste disposal service or visit the website

https://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and its electrical accessories comply with local applicable

rules on the restriction of the use of certain hazardous substances in

electrical and electronic equipment, such as EU REACH regulation,

RoHS and Batteries (where included) directive. For declarations of

conformity about REACH and RoHS, please visit the website

https://consumer.huawei.com/certication.

EU regulatory conformance

Statement

Hereby, Huawei Device Co., Ltd. declares that this device WS8800 is

in compliance with the following Directive: RED 2014/53/EU, RoHS

2011/65/EU, ErP 2009/125/EC.

The full text of the EU declaration of conformity, the detailed ErP

information and most recent information about accessories & software

are available at the following internet address:

https://consumer.huawei.com/certication.

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is used.

This device may be restricted for use, depending on the local network.

Restrictions in the 5 GHz band:

The 5150 to 5350 MHz frequency range is restricted to indoor use in:

AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS,

IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).

In accordance with the relevant statutory requirements in the UK, the

5150 to 5350 MHz frequency range is restricted to indoor use in the

United Kingdom.

Frequency Bands and Power

The frequency bands and transmitting power (radiated and/or

conducted) nominal limits applicable to this radio equipment are as

follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm,

5470-5725 MHz: 30 dBm.

Legal Notice

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND

DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

Trademarks and Permissions

Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks

of Wi-Fi Alliance.

Other trademarks, product, service and company names mentioned

may be the property of their respective owners.

Version Update

In order to improve the security of the product and provide you with a

better user experience, we will push version update information to you

on a regular basis when an important update is released.

To better understand how we use and protect your personal

information, please read the privacy policy at

https://consumer.huawei.com/privacy-policy.

End User License Agreement

Please read and agree to the End User License Agreement (HUAWEI

EULA) on the product’s management page before using the product.

For More Help

Please visit https://consumer.huawei.com/en/support/hotline for

recently updated hotline and email address in your country or region.

Quick Start Guide

Getting Started

3RESET button

WAN/LAN auto-adaptation port: Connects to the Internet

(such as optical modem, broadband modems, etc.) and

wired network device such as a computer.

Power port

H button

Scan the QR code to download and install the HUAWEI AI Life

App on your mobile phone or tablet. You can use the app to

manage your router.

Step 1: Install the app

If the app is already installed on your

phone, make sure you have the latest

version of the app.

POWER 2

RESET

WAN/LAN

Step 2: Connect the cables

Take out a router from HUAWEI WiFi Mesh 7, connect it to the

optical/broadband/cable modem using a network cable, then

connect it to a power supply.

Optical/broadband/cable modem

(from your broadband provider)

Router

Insert the cable to the WAN/LAN

auto-adaptation port on the router

Internet

• If the indicator is steady red, this indicates that the router is not

connected to the Internet. Please refer to "Step 3: Set up the router".

• For routers that support WAN/LAN auto-adaptation, the network ports

are WAN/LAN combo ports. You can also specify a xed WAN port

on the router's web-based management page.

Step 3: Set up the router

Method 1: Congure the router on the app

Connect your mobile phone to the Wi-Fi

® of the router

connected to the modem (no password required). Check for

the Wi-Fi name on the bottom of the router.

WiFi

Connected

Wi-Fi Name: XXXXXX

POWER

LA N

ADSL

RESET

LAN WAN

POWER 2

RESET

WAN/LAN

Open the app. After the app has detected the router, touch

CONFIGURE.

If the prompt box does not appear,

touch +.

CONFIGURE

LATER

Touch GET STARTED.

GET STARTED

4Enter your broadband account and password.

If your Internet connection does not require an account and

password, please skip to the next step.

VLAN

Broadband account

Broadband password

CONNECT

If you need to congure VLAN on

your network, contact your broadband

network provider to conrm the VLAN

parameters, and enable the VLAN

switch on the screen.

Internet access wizard

Set a new Wi-Fi name, Wi-Fi password, and management

password for the new router.

...

Internet access wizard

Wi-Fi name

Wi-Fi password

Router login password

Internet access wizard Internet access wizard

Next Next

Set up Wi-Fi information

Method 2: Congure the router on the web-based

management page

Connect your mobile phone to the Wi-Fi of the router

connected to the modem (no password required). Check for

the Wi-Fi name on the bottom of the router.

2Open the browser and you will be automatically redirected

to the web-based management page (if the page is not

displayed automatically, enter "192.168.3.1" in the browser

address bar). Follow the onscreen instructions to congure

the router.

Let's get started

WiFi

Connected

Wi-Fi Name: XXXXXX

If the pack you purchased contains more than one router, the

other router(s) will set up a network with the rst congured

router automatically after being connected to the power supply.

Place the router(s) in the area where you wish to extend

Wi-Fi coverage, and connect it to a power supply. Wait for

approximately two minutes until the indicator turns steady blue,

indicating that the router is connected to the network. You can

also check their network connection through the app.

Step 4: Connect the other router(s) to the

power supply

• For best results, place the routers within 10 meters of each other

with one wall in-between at most.

• All routers share the same Wi-Fi name and password. When you

move across rooms, you will automatically connect to the faster

Wi-Fi network.

• If a router's indicator is steady red, this means that it cannot

connect to the Internet. Please refer to "Indicator - Steady red"

below for more details.

Indicator

Steady blue: Connected to the Internet.

Steady red: Not connected to the Internet.

Flashing: The router has detected a pairable device.

When other HUAWEI devices (support HarmonyOS Connect)

are detected, the indicator on the HUAWEI WiFi Mesh 7 will

ash. When this happens, press the HUAWEI WiFi Mesh 7's

H button. The indicator should ash quickly, indicating that the

pairable device is connecting to the HUAWEI WiFi Mesh 7.

The connection process is complete when the indicator stops

ashing.

• If you touch the H button accidentally, wait for approximately

two minutes and the indicator will be back to normal

automatically.

• The H button also features WPS functionality.

For the router that is connected to the modem:

• Ensure that the Ethernet cable is not loose and connected

correctly.

• Contact your network provider to check for any network failure.

For the router(s) that is/are not connected to the modem:

• Ensure that the distance between two routers is less than 10

metres and there are no more than one wall in between.

Frequently Asked Questions (FAQs)

1. What should I do if after conguring my router, my mobile

phone automatically connects to the Wi-Fi network of the

previously connected optical/broadband/cable modem

instead of the Wi-Fi network of my router?

2. What should I do if the router is not recognised on the

app?

It is recommended that you disable the Wi-Fi network of your

previous optical/broadband/cable modem to reduce potential

signal interference with your router.

• Ensure that you have the latest version of the app.

• Ensure that your phone is connected to the Wi-Fi network

of the router that is connected to the modem and is to be

congured.

• Ensure that all routers are new or restored to factory

settings.

• Ensure that the router's power supply is well connected. Wait

until the router completes the startup process and try again.

3. What should I do if I encounter any of the following issues

during the conguration of the router?

• If your phone cannot nd the router's Wi-Fi, ensure that the

router is connected to a power supply. Wait until the router

completes the startup process. Then try searching for the

router's Wi-Fi again on your phone.

• If "Internet cable not detected" is prompted, ensure that the

Ethernet cables are well connected and in good condition.

• If "Incorrect username or password" is prompted, re-enter

your broadband account and password. If the problem

persists, contact your network provider for assistance.

4. How do I restore the router to its factory settings?

Connect the router to the power supply and wait until the

router completes the startup process. Use a needle or pin

to press the RESET button on the router for more than two

seconds until the indicator light goes out. Wait for the router

to complete the restart process. When the indicator turns red,

this indicates that the router has been restored to its factory

settings.

If the problem persists, restore the router to its factory settings

and follow the instructions in this guide to reconnect the cables

and re-congure the router.

If the congured router has been restored to factory settings,

you need to congure it again. Then restore the other router(s)

to the factory settings so that it/they can automatically connect

to the congured router.

5. How do I connect an add-on HUAWEI router to my

HUAWEI WiFi Mesh 7 to expand the Wi-Fi network?

You can connect the router in either of the following ways:

• Wired connection. Connect the WAN port of the add-on

router (new or restored to factory settings) to the LAN port

of the congured HUAWEI WiFi Mesh 7 using an Ethernet

cable.

• Wireless connection.

Step 1: Place the add-on router (new or restored to factory

settings) within one metre of the congured HUAWEI WiFi

Mesh 7 and connect it to the power supply.

Step 2: When the indicator on the HUAWEI WiFi Mesh

7 starts to ash, touch the H button on it. Wait until the

indicator on the add-on router shows it is connected to the

network.

Step 3: For broader coverage, disconnect the add-on router

from its power source, then place the router within a 10 m

range of the HUAWEI WiFi Mesh 7, with no more than one

6. How do I connect a Wi-Fi device to my router using WPS?

When your router is powered on, touch its H button, and then

press the WPS button on the Wi-Fi device (such as a phone)

within two minutes to initiate standard WPS negotiation and

connect the Wi-Fi device to the router's Wi-Fi network.

"HUAWEI router" refers to routers that support HarmonyOS

Mesh+. Please check if your device supports such features.

7. How do I use the NFC function of the router to quickly

connect to the Wi-Fi network?

Unlock your phone, enable NFC on it, and touch the NFC

area on the back against the NFC area on the router, then

follow the onscreen instructions to connect the phone to the

Wi-Fi network.

This feature is available on Android devices that support NFC,

but some devices with non-standard NFC may be unable to

connect. iOS devices do not support connecting through NFC.

wall in between the two routers.

Safety information

Operation and safety

• Do not use your device if using the device is prohibited. Do not

use the device if doing so causes danger or interference with other

electronic devices.

• Pacemaker manufacturers recommend that a minimum distance of

15 cm be maintained between a device and a pacemaker to prevent

potential interference with the pacemaker. If using a pacemaker,

hold the device on the side opposite the pacemaker and do not

carry the device in your front pocket.

• Avoid dusty, damp, or dirty environments. Avoid magnetic fields.

Using the device in these environments may result in circuit

malfunctions.

• Ideal operating temperatures are 0 °C to 40 °C. Ideal storage

temperatures are -40 °C to +70 °C. Extreme heat or cold may

damage your device or accessories.

• Keep the device and accessories in a well-ventilated and cool area

away from direct sunlight. Do not enclose or cover your device with

towels or other objects. Do not place the device in a container with

poor heat dissipation, such as a box or bag.

• The device should be installed and operated with a minimum

distance of 20 cm between the radiator and your body.

• Using an unapproved or incompatible power adapter, charger, or

battery may damage your device, shorten its lifespan, or cause a

re, explosion, or other hazards.

• For pluggable devices, the socket-outlet shall be installed near the

devices and shall be easily accessible.

• Unplug the power adapter from electrical outlets and the device

when not in use.

• Do not touch the device or the power adapter with wet hands. Doing

so may lead to short circuits, malfunctions, or electric shocks.

• For optimal Wi-Fi coverage and performance, it is recommended

that the installation distance between multiple mesh routers be

greater than 2 m when there is line of sight (LOS) Internet.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging

means that the products and batteries should be taken to

separate waste collection points designated by local authorities

at the end of the lifespan. This will ensure that EEE waste is recycled

and treated in a manner that conserves valuable materials and

protects human health and the environment.

For more information, please contact your local authorities, retailer, or

household waste disposal service or visit the website

https://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and its electrical accessories comply with local applicable

rules on the restriction of the use of certain hazardous substances in

electrical and electronic equipment, such as EU REACH regulation,

RoHS and Batteries (where included) directive. For declarations of

conformity about REACH and RoHS, please visit the website

https://consumer.huawei.com/certication.

EU regulatory conformance

Statement

Hereby, Huawei Device Co., Ltd. declares that this device WS8800 is

in compliance with the following Directive: RED 2014/53/EU, RoHS

2011/65/EU, ErP 2009/125/EC.

The full text of the EU declaration of conformity, the detailed ErP

information and most recent information about accessories & software

are available at the following internet address:

https://consumer.huawei.com/certication.

Restrictions in the 5 GHz band:

The 5150 to 5350 MHz frequency range is restricted to indoor use in:

AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS,

IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).

In accordance with the relevant statutory requirements in the UK, the

5150 to 5350 MHz frequency range is restricted to indoor use in the

United Kingdom.

UK Regulatory Conformance

Hereby, Huawei Device Co., Ltd. declares that this device WS8800 is

in compliance with the relevant statutory instruments in the UK. The

full text of the declaration of conformity is available at the following

internet address:

https://consumer.huawei.com/certication.

Frequency Bands and Power

The frequency bands and transmitting power (radiated and/or

conducted) nominal limits applicable to this radio equipment are as

follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm,

5470-5725 MHz: 30 dBm.

Legal Notice

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND

DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

Trademarks and Permissions

Wi-Fi

®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks

of Wi-Fi Alliance.

Other trademarks, product, service and company names mentioned

may be the property of their respective owners.

Version Update

In order to improve the security of the product and provide you with a

better user experience, we will push version update information to you

on a regular basis when an important update is released.

To better understand how we use and protect your personal

information, please see the privacy policy at

https://consumer.huawei.com/privacy-policy.

End User Licence Agreement

Please read and agree to the End User Licence Agreement (HUAWEI

EULA) on the product’s management page before using the product.

For More Help

Please visit https://consumer.huawei.com/en/support/hotline for

recently updated hotline and email address in your country or region.

Guide de démarrage rapide

Premiers pas

3Bouton RESET

Port d'auto-adaptation WAN/LAN : connecte à Internet

(modem optique, modems haut débit, etc.) et à un appareil

de réseau laire (ordinateur, par exemple).

Port d'alimentation

Bouton H

Scannez le QR code pour télécharger l'application HUAWEI AI

Life et l'installer sur votre téléphone portable ou votre tablette.

Cette application vous permettra de gérer votre routeur.

Étape 1 : Installer l'application

Si l'application est déjà installée sur

votre téléphone, vériez que vous

avez bien sa version la plus récente.

POWER 2

RESET

WAN/LAN

POWER

LA N

ADSL

RESET

LAN WAN

POWER 2

RESET

WAN/LAN

Internet

Étape 2 : Connecter les câbles

Sortez un routeur HUAWEI WiFi Mesh 7, connectez-le au

modem optique/haut débit/laire à l'aide d'un câble réseau, puis

branchez-le sur un bloc d'alimentation électrique.

Modem optique/haut débit/laire

(provenant de votre fournisseur haut débit)

Routeur

Insérez le câble dans le port d'auto-

adaptation WAN/LAN du routeur

Internet

Étape 3 : Congurer le routeur

Méthode 1 : congurer le routeur dans l'application

• Si le voyant est au rouge xe, cela indique que le routeur n'est pas

connecté à Internet. Reportez-vous à l'étape 3 : Congurer le

routeur.

• Sur les routeurs qui prennent en charge l'auto-adaptation WAN/

LAN, les ports réseau sont des ports WAN/LAN combinés. Vous

pouvez également spécier un port WAN xe dans la page web

d'administration du routeur.

Ouvrez l'application. Après que l'application a détecté le

routeur, touchez CONFIGURER.

Si la boîte de dialogue n'apparaît

pas, touchez +.

CONFIGURER

ULTÉRIEUREMENT

Appuyez sur COMMENCER.

COMMENCER

Connectez votre téléphone portable au Wi-Fi® du routeur

connecté au modem (aucun mot de passe n'est exigé). Vous

trouverez le nom du réseau Wi-Fi (Wi-Fi Name) en bas du

routeur.

Wi-Fi

Connecté

Wi-Fi Name: XXXXXX

Méthode 2 : congurer le routeur dans la page web

d'administration

Connectez votre téléphone portable au Wi-Fi du routeur

connecté au modem (aucun mot de passe n'est exigé). Vous

trouverez le nom du réseau Wi-Fi (Wi-Fi Name) en bas du

routeur.

2Ouvrez le navigateur et vous serez automatiquement

redirigé vers la page web d'administration (si la page ne

s'a󰀩che pas automatiquement, saisissez « 192.168.3.1 »

dans la barre d'adresse du navigateur). Laissez-vous guider

par les instructions à l'écran pour congurer le routeur.

Commençons

Wi-Fi

Connecté

Wi-Fi Name: XXXXXX

Si le pack que vous avez acheté contient plusieurs routeurs, le

ou les autres routeurs se mettront automatiquement en réseau

avec le premier routeur conguré après avoir été connectés à

une alimentation électrique. Placez le(s) routeur(s) dans la zone

où vous souhaitez étendre la couverture Wi-Fi et connectez-le(s)

à une alimentation électrique. Attendez environ deux minutes

jusqu'à ce que le voyant passe au bleu xe, indiquant que le

routeur est bien connecté au réseau. Vous pouvez également

vérier leur connexion réseau via l'application.

Étape 4 : Connecter le ou les autres routeurs

au bloc d'alimentation

Voyant

Bleu xe : connecté à Internet.

Rouge xe : non connecté à Internet.

Clignotant : le routeur a détecté un appareil pouvant être

associé.

Lorsque d'autres appareils HUAWEI (prenant en charge

HarmonyOS Connect) sont détectés, le voyant du HUAWEI

WiFi Mesh 7 se met à clignoter. Lorsque cela se produit,

touchez le bouton H du HUAWEI WiFi Mesh 7. Le voyant

doit alors se mettre à clignoter rapidement pour indiquer que

l'appareil associable est en train de se connecter au HUAWEI

WiFi Mesh 7. La connexion est établie lorsque le voyant s'arrête

de clignoter.

• Si vous touchez le bouton H par inadvertance, attendez environ

deux minutes. Le voyant reviendra automatiquement à la

normale.

• Le bouton H comporte également la fonctionnalité WPS.

Pour le routeur qui est connecté au modem :

• Vériez que le câble Ethernet est correctement branché.

• Vériez auprès de votre opérateur qu'il n'y a pas de panne

du réseau.

Pour les routeurs qui ne sont pas connectés au modem :

• Assurez-vous que la distance entre deux routeurs est

inférieure à 10 mètres et que les routeurs ne sont pas

séparés par plus de un mur.

100

POWER

LA N

ADSL

RESET

LAN WAN

POWER 2

RESET

WAN/LAN

Internet

Paso 2: Conexión de los cables

Extraiga un router del HUAWEI WiFi Mesh 7, conéctelo al

módem óptico, de banda ancha o cable módem con un cable de

red y conéctelo a una fuente de alimentación.

Módem óptico, de banda ancha o cable módem

(de su proveedor de banda ancha)

Router

Inserte el cable en el puerto de adaptación

automática WAN/LAN del router

Internet

• Si el indicador permanece de color rojo sin parpadear, signica que

el router no está conectado a Internet. Siga con el “Paso 3:

Conguración del router”.

• En los routers que admiten la autoadaptación de WAN/LAN, los

puertos de red son puertos que combinan redes WAN y LAN.

También se puede especicar un puerto WAN jo en el portal de

conguración del router.

Paso 3: Conguración del router

Método 1: Conguración del router desde la aplicación

Conecte su teléfono al Wi-Fi® del router conectado al módem

(no se requiere contraseña). Busque el nombre de la red Wi-

Fi (Wi-Fi Name) en la base del router.

Wi-Fi

Conectado

Wi-Fi Name: XXXXXX

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Huawei WiFi Mesh 7 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Huawei WiFi Mesh 7 Manual

Product: