500674
9
Zoom out
Zoom in
Previous page
1/38
Next page
9
werden!
Sie erfüllen damit die gesetzlichen Ver-
pichtungen und leisten Ihren Beitrag
zum Umweltschutz.
Automatic charger AL 800 compact
Before using the device, please consider
the instructions in this manual.
It is required by law that we give you im-
portant instructions for your own safety
and make you aware of how you can
avoid damage to people, the device and
other facilities.
If this manual is not taken into considera-
tion, the manufacturer is not liable for any
damage that results from negligence or
deliberate disregard of the manual.
Danger during charger operation
The charger is produced according to the
state of the art and approved safety-rela-
ted regulations. However, in case of mal-
operation or misuse, there is the threat to
- physical condition and life of the user or
third parties,
- the charger and equipment of the ope-
rator.
Every person who deals with the set-up,
operation, maintenance and Servicing of
the charger, must be either accordingly
qualied, acquire or have knowledge in
handling chargers and consider this ma-
nual in detail.
Errors affecting safety must be avoided
and if necessary xed immediately.
To ensure safe operation, the operator
must consider the safety instructions and
warnings included in the manual.
Intended use
The device is designed for automatic
charge and buffering of lead batteries
with 2, 6 or 12V
terminal tension. A sliding switch carries
out the set-up of the battery voltage.
Possible battery types are lead-gel, lead-
eece or lead-acid-batteries.
Primary batteries (zinc-carbon, alkaline,
etc.) or other battery types must not be
plugged in or charged.
Another mode of operation other than the
one specied is not allowed and results in
the damage of the product.
In addition, this is linked with dangers,
such as short-circuit, ring, electric shock
etc.
Specications
The I-U-charging concept charges the
lead-battery with constant current of 800
mA (0,8A) until the end of charge voltage
is reached for the respective battery.
The charger recognises this and switches
to constant current in order to adjust the
charging current down (Maintenance
charger). The battery charger is therefore
maintained at an ideal level.
As a result, the battery can be plugged
into the charger for a longer period of
time. This is the reason why this device
is suitable for “over wintering”. The lumi-
nous display on the charger always gives
information on the current operating sta-
tus. The plug charger is protected against
overcharge and short-term short-circuit
(<1min.). The polarity on the charging out-
put must be taken into consideration. A
protective circuit avoids charging in case
of incorrect poling that could destroy the
battery as well as the charger. Incorrect
poling will be indicated by a red light. The
connection is carried out by marked bat-
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HTronic AL 800compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HTronic AL 800compact in the language / languages: German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info