669340
9
Zoom out
Zoom in
Previous page
1/27
Next page
08/2011 9
english
Switch off the shredder and pull out the mains
plug. When cleaning only use a soft cloth and
a mild soap-water solution. However, no water
may enter the equipment.
Oil the cutting unit when
cutting performance deterio-
rates or the device becomes
noisy, or every time you
empty the waste container.
Squirt special cutting unit oil (order number
1.235.997.421) through the paper feed
across the entire width of the cutting shafts.
Without feeding in paper, run the cutting unit
in reverse (R).
This loosens paper dust and particles.
7 Cleaning and maintenance
Push down the front of the container (1), push it
back (2) and lift the container out of the bracket
(3).
Note that the shredder can only be switched on
when the CD container is properly in place.
1
2
3
Instructions on removing the CD container
LED-indicator Cause Remedy
No LED lights up - Place the cutting head correctly on the base cabinet
and push the containers for shredded paper and CDs in
properly.
Press “I” on the switch.
Both LEDs light up The shredded
paper container
is full
Empty the container
.
If you take the cutting head of
f the base cabinet, take
care not to damage the ap on the bottom of the cutting
head.
The red LED ashes Overheating The maximum uninterrupted operating time is ve
minutes. Let the machine cool down for around
20 minutes.
Only the red LED
lights up
Paper cutting
unit overloaded
Press “R” on the switch.
Note: The cutting unit starts up with a delay of two
seconds.
Remove the paper.
Do not feed in more than 15 sheets of paper at a time.
For all other malfunctions, check whether the cutting head was correctly positioned on the shred-
ded material container before contacting our customer service. If the motor was overloaded, let the
shredder cool down for 15 to 20 minutes before using it again.
6 Troubleshooting
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HSM OX 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HSM OX 8 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info