720361
13
Zoom out
Zoom in
Previous page
1/18
Next page
VPA2100MN
V. 03 12/04/2013 13 ©Velleman nv
5. Uso
Véase las figuras en la página 2 de este manual del usuario.
Panel frontal
1
2
3
4
5
Panel trasero
6
7
8
9
10
Señal de entrada balanceada / no balanceada
Los dos canales del amplificador están equipados con una entrada balanceada XLR (hembra)
y un conector balanceado 6.35 mm mono.
¡Apantalle los cables de entrada!
Si se debe conectar una señal de entrada no balanceada al utilizar un conector XLR, conecte
los contactos 1 y 3 (véase figura a la izquierda). Para una señal de entrada no balanceada,
puede también usar el conector de 6.35 mm.
Nota: Este amplificador conmuta al modo de seguridad en caso de un sobrecalentamiento. Si no es el caso,
deje que el amplificador se enfríe. Estará de nuevo listo para utilizar después de que la protección térmica se
haya enfriada. Esto puede durar hasta 45 minutos.
6. Limpieza y mantenimiento
Apriete bien las tuercas y los tornillos y verifique que no hay señales de oxidación.
No modifique la caja y las partes de montaje, p.ej. no taladre agujeros adicionales en un soporte o no
modifique las conexiones, etc.
No dañe los cables de alimentación. El mantenimiento debe ser realizado por un técnico cualificado.
Desconecte el aparato de toda fuente antes de limpiarlo.
Limpie el aparato regularmente con un paño húmedo sin pelusas. No utilice alcohol ni disolventes.
El usuario no habrá de efectuar el mantenimiento de ninguna pieza salvo el fusible.
Contacte con su distribuidor si necesita piezas de recambio.
7. Especificaciones
alimentación
máx. 230 VAC/50 Hz
potencia de salida (estéro)
2 x 60 Wrms/4 Ω
2 x 50 Wrms/8 Ω
conexiones de entrada
jack XLR y jack 6.35 mm
indicación LED
signal, clip, power
ajuste de enfriamiento
automático
conexiones altavoz
por tornillo, conector banana
fusible
250 Vac/3,15 A; 5 x 20 mm (referencia FF3N)
peso total
7,4 kg
dimensiones
482 x 240 x 95 mm
temperatura ambiente máx.
45 °C
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ-Power VPA2100MN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ-Power VPA2100MN in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info