720353
4
Zoom out
Zoom in
Previous page
1/26
Next page
PROMIX50U
V. 02 20/06/2019 4 ©Velleman nv
4
Input Selector
Phono/line selection switch for channel 1. The phono setting is intended for turntables; the line
setting is for all other signal sources, e.g. a CD player.
o Never connect line-level equipment to the highly sensitive phono input. The output levels of
phono-level equipment are in the mV range; the output levels of line-level equipment are in
the V range.
o Do not turn up the volume when no turntable is connected to the phono input. Doing so will
cause hum or noise.
o The PFL signal is a pre-fader headphones signal enabling you to listen to a signal source
without affecting the main signal.
5
Channel 2
Fader for channel 2.
6
Input Selector
Phono/line selection switch for channel 2. See [4].
7
Channel USB
Output adjustment for the equipment connected to the USB input.
8
Output Selector
Mono/stereo selection switch.
9
Output Meter
VU meter indicating the output of the left and right master signals.
10
Power
Power switch.
11
LED
Power LED, turns on when the mixer is switched on.
12
USB
Input port for MP3 player.
13
Selection button for selecting the next track on the MP3 player.
14
Stop button for stopping the track on the MP3 player.
15
Play/pause button for starting/pausing/resuming the track on the MP3 player.
16
Selection button for selecting the previous track on the MP3 player.
17
00 ~ 10
Volume adjustment of the headphones signal.
18
Channel 1 ~ Channel 2
Crossfader for fading between channels 1 and 2.
19
Talkover
Microphone talkover switch allowing you to lower the level of the sound source while you are
talking into the microphone.
REAR PANEL
With the exception of the headphones, all of the audio connections are located at the rear of the
mixer.
20
AC 12V
Power supply input.
21
Master Output
Left and right output connections to an amplifier. In order to avoid power-up thumps, which can
damage your speakers, please power up your amplifier last. There should be no signal present
when turning on an amplifier. In addition, we suggest that you set all volume adjustment knobs
to zero before powering up the system. Following these precautions will save you from
unpleasant and potentially dangerous surprises.
22
Channel 2
Left and right phono/line input connections for channel 2.
23
Channel 1
Left and right phono/line input connections for channel 1.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ-Power PROMIX50U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ-Power PROMIX50U in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info