214358
14
Zoom out
Zoom in
Previous page
1/42
Next page
14
Turning the projector ON and OFF
Turning the projector ON
1. Remove the lens cap n by squeezing the cap’s tabs and pulling forward.
2. Ensure that the power cord and signal cables are securely connected to the
projector and the signal source (computer, notebook, video player, etc.).
3. Turn the projector ON by pressing the Power ON/OFF button on the
control panel. o
The cooling fan turns on.
The hp start-up screen will be displayed for 30 seconds and the blue
Power Indicator Light will light up.
4. Turn on your signal source. The projector will detect your source
automatically.
If the screen displays “Waiting for Signal” make sure the signal cables are
securely connected.
If multiple signal sources are connected, use the “Source” button on the
Remote Control or Control Panel to switch to the desired input.
When the Lamp Indicator Light p is ON, replace the lamp.
When the Temp Indicator Light q is ON, it indicates that the projector has
overheated. The projector’s lamp will automatically turn OFF. Press the
“Power ON/OFF” button and allow the projector to complete its cool-
down cycle. Then you can restart the projector and continue your
presentation. If the problem persists, contact hp support:
(www.hp.com/support/digitalprojectors).
When the Temp Indicator Light q FLASHES, the projector has detected a
failure in the cooling system. Press the “Power ON/OFF” button and allow
the projector to complete its cool-down cycle. Contact hp support:
(www.hp.com/support/digitalprojectors).
Turning the projector OFF
1. Press the Power ON/OFF button. The projector lamp will turn off and the cooling fan will run for
the duration of the cool-down cycle.
The blue Power Indicator Light will blink until the cool-down cycle is complete.
The blue Power Indicator Light will then turn OFF and the cooling fan will stop.
2. Disconnect the power cord from the electrical outlet and the projector.
operation
x
b31 sb21
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP xb 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP xb 31 in the language / languages: English as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info