436635

HP streamsmart 400 Manual

32
Zoom out
Zoom in
Previous page
1/60
Next page
Capturing Data from Events
28
Figure 3-7
An events-with-entry set up
In Figure 3-7, C2 is highlighted as the destination for data from the sensor in
Channel 2 of the StreamSmart 400. Pressing !sgsy]!!CHK! now will toggle Channel 2 to
be inactive. Pressing the CHOOS menu key drops down a list of C1 through C9, and
C0, from which you can choose any other column for the data from the sensor in
Channel 2. Press $OK% to accept all your changes at any time, or the CANCL menu
key to cancel all changes; either way, you will return to the Numeric view.
In Figure 3-8, the EVENT METHOD field is highlighted, showing that With
Entry has been selected. You may choose to have the events auto-numbered or
skip adding any numerical entries to the events (Event Only). Press the CHOOS
menu key to make a selection from these three options, as shown in Figure 3-9.
Press the $OK% menu key to accept your new selection, or the CANCL menu key to
keep the current selection and return to the Numeric view.
Monitor and select events
Once you have activated the proper channels and set destinations for the data
from these channels, you are ready to begin collecting data. Of course, you can
always just start by collecting data using the default columns. To capture an event,
just press the $ADD# menu key. If you have selected to capture events only, or to
have them auto-numbered, you will see a display similar to the one depicted in
Figure 3-10, which shows that your event data are being added to the current data
set. If you have selected to add events to your entry, the display will appear as
shown in Figure 3-11, prompting you to add your numerical entry to the event just
captured.
Figure 3-8 Event Method field Figure 3-9 Event Method options
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP streamsmart 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP streamsmart 400 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info