694115
3
Zoom out
Zoom in
Previous page
1/15
Next page
2
Caring for your HP Sprocket Studio
There are two ways you might need to reset your sprocket printer:
Hardware Reset
If the printer isn't responding or won't connect to your mobile device, try performing a hardware reset. If you have
connectivity issues with your printer, unuplug the power cord from the wall outlet and wait for a few seconds . Then,
plug the printer in again and power on.
When you complete a hardware reset, your personalized settings will be saved (Custom Name, Personal Color, etc.).
How to Reset your HP Sprocket Studio
Factory Reset
Perform a factory reset to return to the default settings if you want to gift your sprocket to someone else. A factory
reset might also be used if Privacy is turned on for your mobile device and the device is lost. Completing a factory reset
would allow a new phone to connect. Before completing a factory reset, update your printer rmware.
You can initiate a factory reset by using the steps below. A factory reset can be completed when connected to a wall
outlet or to the HP Sprocket Studio Power Bank.
1. Hold the power button for about 7 seconds total. After 3 seconds, the Status LED light will turn o to indicate
the printer is shutting down; continue to hold the Power button until the LED lights start to ash.
2. Release the power button. The LEDs will continue blinking for about 6 seconds.
3. While the LEDs are blinking, press and release the power button. The device will remain o until you power on
again.
4. Power on; the printer will be reset to factoring settings. After a factory reset, all settings are reset to factory
defaults (Custom Name, LED color, Sleep Time, Auto-O, etc.)
If you decide you do NOT want to reset the printer to factory defaults, you can abandon the reset. While the LEDs are
blinking, do not press the Power button as directed in step three above. This will also cancel the factory reset.
Note:
If you want to pair again with your device after a Factory Reset, make sure to also "forget" your device in your operating
system's Paired Devices list. Then, re-pair in the sprocket app.
Remove ngerprints, dust, and dirt from the printer using a dry microber cloth.
Keep the Paper Tray Cover closed to prevent dust and debris from entering the paper path.
Update the printer rmware. Make sure your mobile device is connected to the Internet and then open the
sprocket app. Turn on the printer and connect it to the sprocket app. If there is a rmware update available, a
rmware update screen displays. Follow the on-screen prompts to complete the update. Make sure the printer is
plugged in to a wall outlet to complete a rmware update. If you are connected to the power bank, make sure you
plug the power bank into a wall outlet using the included AC power adapter and power cord.
Keep your sprocket app updated. If you don’t have your mobile app set to automatically update, go to the
appropriate app store and make sure the latest version is installed.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Sprocket Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Sprocket Studio in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Sprocket Studio

HP Sprocket Studio Additional guide - English - 10 pages

HP Sprocket Studio Additional guide - German - 10 pages

HP Sprocket Studio User Manual - German - 15 pages

HP Sprocket Studio Additional guide - Dutch - 10 pages

HP Sprocket Studio User Manual - Dutch - 15 pages

HP Sprocket Studio Additional guide - French - 10 pages

HP Sprocket Studio User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info