682193

HP Smart Tank Wireless 450 series Manual

3
Zoom out
Zoom in
Previous page
1/71
Next page
English
3
Important Ink Information
After you have set up the printer, do not open the printhead latch unless you are installing new printheads or
moving the printer outside your home or oice. In addition, you should maintain proper ink levels in the ink tanks
when printing.
Maintain proper ink levels
Use the ink level lines on the ink tanks to determine when to ll the tanks and how much ink should be added.
Never print when any of the ink tanks has less than the minimum amount of ink. Printing with too little ink or lling
tanks with too much ink can damage the printer and aect print quality. Make sure you match the color of the ink to
the color on the ink tank when you rell an ink tank. See the Start here booklet for instructions on how to ll the ink
tanks.

Minimum ink level
Ink level should never go below the minimum ink line.
Printing with ink level below the minimum line may cause
damage to your printer.

Maximum ink level
Do not ll ink above the maximum ink line. Overlling
might cause ink leakage. When you rell, some ink might
be left in the ink bottle. You can save the remaining ink by
storing the ink bottle in a dry cool place for future relling.
NOTE: Product service or repairs required as a result of lling the ink tanks improperly and/or using non-HP ink will
not be covered under warranty.
Display Error Solution
Printhead Carriage Stall
1. Open the front door, and then open the printhead access door.
2. Make sure the printhead latch is properly closed and the print carriage is not
obstructed.
IMPORTANT: Do not open the printhead latch but check that it is pushed down
rmly. Keep printhead latch closed unless installing new printheads or moving
printer outside your home or oice.
3. Close printhead access door, then front door.
4. Press
(the Resume button) to continue printing.
Paper Jam
Clear the jam, and then press
(the Resume button) to continue printing.
For more information, see the user guide on www.support.hp.com.
System Maintenance Required
Open the printhead access door completely, and then close it immediately.
This process helps remove ink buildup and maintains the best print quality
throughout the life of the printer.
IMPORTANT: Do not open the printhead latch unless you get this message, or
are installing new printheads, or moving the printer outside your home or oice.
Out of Paper
The Error icon (
), the Paper
Error icon ( ), and Resume
light ( ) are blinking.
1. Load paper in the input tray.
2. Press
(the Resume button) to continue printing.
NOTE: For more information on how to load paper, see the user guide on
www.support.hp.com.
Printhead Problem
The Error icon (
), one or both
Printhead icons ( ), and
Printhead Alert light ( )
are blinking.
Flashing left printhead icon: Indicates an error with the tri-color printhead.
Flashing right printhead icon: Indicates an error with the black printhead.
If you are setting up the printer for the rst time, make sure you have removed
the tape from the printhead.
If you have been using your printer and are starting to see print quality
problems, the printhead indicated needs to be replaced. Contact HP support at
www.support.hp.com to get a replacement printhead.
Moving printer after setup
To prevent damage to the printer or ink leakage, follow these instructions.
If you are moving the printer within your home or oice, keep the printhead latch closed, and keep the printer level.
If you are moving the printer outside your home or oice, visit www.support.hp.com or contact HP.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Smart Tank Wireless 450 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Smart Tank Wireless 450 series in the language / languages: All languages as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Smart Tank Wireless 450 series

HP Smart Tank Wireless 450 series User Manual - English - 137 pages

HP Smart Tank Wireless 450 series User Manual - German - 144 pages

HP Smart Tank Wireless 450 series User Manual - Dutch - 141 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info