212590
29
Zoom out
Zoom in
Previous page
1/42
Next page
Scanner Error Message Recovery Process
04 Follow these steps to resolve the error:
1. Check the USB connection between the scanner and the
computer. For more help, see Check the cables.
2. Verify that the scanner is correctly enumerated on the host. If
not, try uninstalling and then reinstalling the software. For more
information, see the HP Scanjet N8400 series Setup and
Support Guide.
3. If the problem persists, contact HP Support. For more
information, see Contact HP Support.
05 Press the Power Save button to turn the scanner off, and then turn
the scanner on again by pressing one of the front panel buttons. If
the message is still displayed, contact HP Support. For more
information, see Contact HP Support.
06 Press the Power Save button to turn the scanner off, and then turn
the scanner on again by pressing one of the front panel buttons. If
the message is still displayed, contact HP Support. For more
information, see Contact HP Support.
07 Press the Power Save button to turn the scanner off, and then turn
the scanner on again by pressing one of the front panel buttons. If
the message is still displayed, contact HP Support. For more
information, see Contact HP Support.
Scanner initialization or hardware problems
Scanner does not start
Scanner has stopped working correctly
Scanner does not start
If you receive an error message similar to “Scanner initialization failed” or “Scanner not
found” when trying to use the scanner, follow these steps:
1. Close the scanning software, if it is open.
2. Disconnect the USB cable that connects the scanner to the computer.
3. Press the Power switch to the off position.
4. Shut down the computer operating system, turn the computer off, wait 60 seconds,
and then turn the computer back on.
5. Press the Power switch to the on position.
6. Reconnect the USB cable that connects the computer and the scanner, making sure
that the USB cable is connected to the back of the scanner correctly.
After 30 seconds, the scanner display should show Ready. If the display does not
show Ready, see the printed Setup and Support guide that came with the scanner.
(continued)
Scanner initialization or hardware problems 27
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet n8420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet n8420 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info