212587
31
Zoom out
Zoom in
Previous page
1/42
Next page
Error Code Description
3. Make sure the paper meets the size and weight specifications,
as specified in the scanner User Guide.
4. Replace the paper into the document feeder.
If this error occurs when there is no paper feed error, the misfeed
(multipick) detection sensor is not working correctly. Contact HP
Support.
NOTE: You can disable misfeed (multipick) detection in the
TWAIN/ISIS Advanced Settings dialog box.
Error 23 Lamp Error Press the Power switch to the off position to turn the scanner off.
Wait 30 seconds, and then press the Power switch to the on position
to turn the scanner on. If the message is still displayed, contact
HP
Support.
Error 24 Pick Failure The document feeder cannot pick up the paper or the paper is
jammed. Follow these steps to resolve the error:
1. Remove the paper from the document feeder.
2. Sort through the stack to make sure the sheets are not stuck
together.
3. Make sure the paper meets the size and weight specifications,
as specified in the scanner User Guide.
4. Replace the stack of originals and try again.
Scanner initialization or hardware problems
Scanner does not start
Scanner has stopped working correctly
Scanner does not start
If you receive an error message similar to “Scanner initialization failed” or “Scanner not
found” when trying to use the scanner, follow these steps:
1. Close the scanning software, if it is open.
2. Disconnect the USB cable that connects the scanner to the computer.
3. Turn the scanner off.
4. Shut down the computer operating system, turn the computer off, wait 60 seconds,
and then turn the computer back on.
5. Turn the scanner on.
6. Reconnect the USB cable that connects the computer and the scanner, making sure
that the USB cable is connected to the back of the scanner correctly.
After 30 seconds, the characters on the scanner front panel should stop blinking. If
the characters are blinking, see the printed Setup and Support guide that came with
the scanner.
(continued)
Scanner initialization or hardware problems 29
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet n7710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet n7710 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info