212678
13
Zoom out
Zoom in
Previous page
1/30
Next page
1. Open the scanner lid.
2. Remove the negative strip holder from the slide holder.
3. Do one of the following to load the slides or negatives:
If you are scanning slides, place the slides into the slide holder. Insert the slides
with the top of the slides pointing up and with the front of the slides facing you,
making sure that the slides are flat and do not overlap.
If you are scanning negatives, do the following:
a. Remove the light-shield from the negative strip holder.
b. Slide a negative strip with up to five frames into the negative strip holder so that
the shiny side of the negative faces you. Negatives are easily damaged, so you
should touch them only on their edges.
c. If the negative strip has fewer than five frames, insert the negatives light-shield
into the negative strip holder, making sure the left edge of the light-shield touches
the last slide.
d. Insert the negative strip holder back into the slide holder.
4. Close the scanner lid.
5.
Press the Scan (
) button on the scanner, or click Scan in HP Solution Center.
6. Select a scan shortcut appropriate to the film (positives or negatives) you are
scanning; the corresponding settings display to the right.
If you want to preview the scanned picture, select the Show a preview check box on
the screen, or begin the scan from HP Solution Center.
7. Click Scan.
8. Follow the instructions on the screen to finish scanning.
The scan is sent to the default destination.
9. When the scan is finished, remove the slides. Place the negative strip holder back
into the scanner lid for convenient storage.
Tips for scanning transparent items
To scan items larger than those that the transparent materials adapter (TMA) or
template accepts, place the transparency on the scanner glass, place a white sheet
of paper on top of the transparency, and then scan as described in
Scan pictures.
When scanning a 35 mm slide or negative, the scanner software automatically
enlarges the image to approximately 10 cm x 15 cm (4 x 6 inches). If you want the
final image to be larger or smaller, use the Resize tool in the scanner software to set
the scaling to the final size that you select. The scanner will scan the item to the size
that you select and adjust the scan resolution as appropriate.
When cropping images, completely remove the borders to reduce excess light
interference.
Figure 1-3 A cropped image from a slide
Scan film 11
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet g3110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet g3110 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info