510728
30
Zoom out
Zoom in
Previous page
1/41
Next page
To reset the scanner, follow these steps:
1. Close the HP Smart Document Scan Software and HP Scanner Tools Utility, if they
are open.
2. Disconnect the USB cable that connects the scanner to the computer.
3. Turn the computer off, wait 60 seconds, and then turn on the computer.
4. Reconnect the USB cable to a USB port on the back of the computer.
Make sure that the USB cable is connected to the back of the scanner correctly.
The trident icon on the USB cable faces up when the cable is properly connected
to the scanner.
Try connecting the USB cable to a different USB port on the back of the computer.
Scanner has stopped working correctly
If the scanner stops scanning, follow these steps. After each step, start a scan to see if
the scanner is working. If the problem persists, proceed with the next step.
1. A cable might be loose. Ensure that both the USB cable and power supply are properly
connected.
Use the cable that was included with the scanner. Another USB cable might not be
compatible with the scanner.
2. Ensure that the scanner is receiving power.
a. Check that the green LED on the power supply case is on.
b. If the green LED is not on, ensure that power is available to the power outlet or
surge protector that the power supply is plugged into.
c. If power is available to the power outlet or surge protector but the green LED is
still not on, the power supply might be defective. Contact
www.hp.com/support
for assistance.
3. Unplug the power cable from the power source, wait 60 seconds, and then plug it
back in.
4. Restart your computer.
5. Use the Add/Remove tool (in Windows Vista, the Programs and Features tool) from
the Control Panel to uninstall the following applications:
ISIS/TWAIN software
HP Scanjet Enterprise 9000 Utilities
6. Reinstall using the HP Scanning Software CD that came with your scanner.
7. Reconnect the USB cable and power cable to the scanner, and then press the
Power switch to the on position.
Scanner operation problems
Scanner will not turn on
Scanner lamp stays on
Scanner does not scan right away
Scanner scans only one side of a two-sided page
Scanned pages are missing at the scan destination
Scanned image is fuzzy
Chapter 5
28 Troubleshooting
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Scanjet enterprise 9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Scanjet enterprise 9000 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Scanjet enterprise 9000

HP Scanjet enterprise 9000 Installation Guide - German, Dutch, French, Italian - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info