212574

HP scanjet 8350 Manual

56
Zoom out
Zoom in
Previous page
1/65
Next page
Buttons do not work
After each step, start a scan to see if the buttons are working. If the problem continues,
proceed with the next step.
● A cable might be loose. Ensure that the USB cable, the accessory cable, and the
power cable are securely connected.
● Turn off the scanner, wait 30 seconds, and then turn the scanner back on.
● Restart your computer.
● The buttons might be disabled. Windows users should try the following procedure:
– Open Control Panel, select Scanners and Cameras, and then select your
scanner model from the list.
– Open Properties, and then click the Events tab. From the Scanner events list,
select Scan Document button press.
– Ensure that the HP Scanning software option is selected.
– Windows 98 and Windows 2000: Ensure that the Disable Device Events option
is not selected.
– Windows Me and Windows XP: Ensure the Take No Action option is not
selected.
An unexpected program opens when a customizable button is pressed
Depending on the computer operating system and the HP scanning software installed
on the computer, an unexpected program might open when a button is pressed.
● You expect to see either HP Solution Center or HP Smart Document Scan Software
● A non-HP scanning program opens when a button is pressed
You expect to see either HP Solution Center or HP Smart Document Scan Software
If you expected to see either HP Solution Center or HP Smart Document Scan Software,
verify that the program that you want is installed on the computer:
● HP Solution Center: Click Start, point to Programs or All Programs, point to HP.
You should see HP Solution Center.
● Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point
to 8350, 8390, and then look for HP Smart Document Scan Software.
If the program that you want is not installed, then use the appropriate HP scanning
software CD to install the program.
If the program that you want is installed, then use the HP Button Settings Utility to
configure the buttons for the program. For more information, see Configure the scanner
customizable buttons.
A non-HP scanning program opens when a button is pressed
If a non-HP scanning program opens when a button is pressed, follow these steps:
1. Do one of the following:
– Windows XP: Click Start, and then click Control Panel.
– Other Windows versions: Click Start, point to Settings, and then click Control
Panel.
2. Click Scanners and Cameras.
Chapter 10
54 HP Scanjet 8300 series
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet 8350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet 8350 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info