212604
80
Zoom out
Zoom in
Previous page
1/132
Next page
80 Troubleshooting usage and maintaining Back to TOC
Scanned images have unwanted lines through them.
The scanner glass might be dirty. Clean the glass. See
"Cleaning the scanner" on page 95.
If you are using the ADF, there might be a page on the scanner
glass. Raise the ADF unit and remove any pages on the scanner
glass.
If you are using the ADF, the ADF window might be dirty or
scratched. Clean the ADF window. See "Cleaning the ADF" on
page 96. If cleaning does not correct the issue, the ADF window
might need to be replaced. See "Replacing the ADF Window" on
page 98.
Scanned image is not clear.
The resolution, sharpening, or midtone, highlight, and shadow
settings might need to be adjusted before scanning. See
"Scanning from HP PrecisionScan Pro" on page 29.
The original might be on colored paper. If the original was
printed on a colored paper, including brown recycled paper, the
image or text might not be clear. Try adjusting the resolution and
midtone, highlight, and shadow settings from the
HP PrecisionScan Pro software. See "Scanning from HP
PrecisionScan Pro" on page 29.
The image is completely black or completely white.
The item might not be placed correctly on the scanner glass or
in the ADF. Make sure that the item you are trying to scan is
placed face down on the glass, or face up in the ADF.
If you are using the ADF, there might be a page on the scanner
glass. Raise the ADF unit and remove any pages on the scanner
glass.
If you are using the ADF, the ADF window might need to be
replaced. See "Replacing the ADF Window" on page 98.
Colors in the scanned image are different from the original item.
Scanners, monitors, printers, and different operating systems
interpret color differently. Use the hue and saturation settings in the
HP PrecisionScan Pro software to adjust the colors.
In the HP PrecisionScan Pro software, all of the image scanned when
I only wanted part, or vice versa.
The selection area might not be selected correctly. Make sure the
selection border is surrounding the area you want in the final scan.
Scanned images are crooked.
The item might have been placed crookedly or shifted when you
closed the lid. Straighten the original on the scanner glass and
scan again.
I thought I made the image smaller or larger before the final scan in
the HP PrecisionScan Pro software, but it is still the same size as the
original.
You might have zoomed in or out, which does not change the size
of the image. Change the output size. See "Resizing (output
dimensions)" on page 35.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet 7490c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet 7490c in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP scanjet 7490c

HP scanjet 7490c User Manual - Dutch - 133 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info