212530

HP scanjet 4890 Manual

22
Zoom out
Zoom in
Previous page
1/27
Next page
correctly connected, verify that the scanner is turned on, and then test the scanner by
using the following procedure:
1. Disconnect the USB cable and power cable from the scanner.
2. Reconnect the USB cable and power cable to the scanner.
The carriage on the scanner will move forward and backward approximately 25 mm (1
inch), and the lamp will turn on.
If the carriage does not move and the scanner lamp does not turn on, a problem might
exist with the scanner hardware. See Product support.
Scanner has stopped working properly
If the scanner stops scanning, complete the following steps, in order. After each step,
start a scan to see if the scanner is working. If the problem continues, proceed with
the next step.
1. A cable might be loose. Ensure that both the USB cable and power cable are
securely connected.
2. Unplug the power cable from the power source, wait 60 seconds, and then plug it
back in.
3. Reboot your computer.
4. A software conflict might exist on your computer. You might need to uninstall and
then reinstall the scanner software.
a. Click Start, click Settings, and then click Control Panel (in Windows XP,
click Start, and then click Control Panel).
b. Click Add/Remove Programs (in Windows XP, this is called Add or
Remove Programs) and then select the HP Scanjet software.
c. Click Remove.
d. Click Add/Remove Programs (in Windows XP, this is called Add or
Remove Programs) and then select the HP Image Zone software.
e. Click Remove.
5. Reinstall using the HP Image Zone software CD that came with your scanner.
When you insert the CD, an installation interface launches automatically. Choose
the HP Image Zone software to install.
If the scanner still does not work, visit www.hp.com/support or contact HP Customer
Support.
Additional troubleshooting information
If you have the HP Image Zone software installed, you can use the onscreen Help to
solve other problems with the scanner. To gain access to the Help, open HP Solution
Center, click Help, and then click HP Scanjet 4800 series scanner Help. The Help
system provides information about the HP Scanjet 4800 series scanner hardware as
well as information about the HP Image Zone and HP Scanning software itself. Also,
see Scan troubleshooting in the general Troubleshooting and support section of
the Help.
User's Manual 19
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet 4890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet 4890 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP scanjet 4890

HP scanjet 4890 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info