617379
37
Zoom out
Zoom in
Previous page
1/64
Next page
possible installation problems
33
additional setup
information
This section covers how to handle messages that may or may not appear
during installation, how to set up the connection between your computer
and your HP PSC, and how to add and remove the HP PSC software. The
standard installation instructions are provided in your Setup Poster, which
you should keep for later use.
possible installation problems
If you follow the instructions in the Setup Poster correctly, you should not have
any problems with the installation of your HP PSC. If you do not follow the
instructions, you may see any of the following problems:
If Microsoft’s New Hardware Found message does not appear
If you installed the HP PSC software first as requested on the Setup Poster,
and you are a Windows 98/2000/ME/XP user, a series of Microsoft New
Hardware Found messages should have appeared on your screen after
software installation and after the HP PSC was connected to your computer.
If the Microsoft messages did not appear, try the following:
Verify that you are using a full-speed (12 Mbps) USB cable and that it
does not exceed three meters in length (9.8 feet).
Verify that the computer is USB-ready. For more information about
determining whether your computer is USB-ready, see your computer’s
documentation or check with the computer’s manufacturer.
Verify that the cable is plugged fully into your HP PSC and directly
connected to the USB port on your computer. After the cable is
connected properly, turn your HP PSC off and then on again.
Turn your HP PSC off and then on again, then restart your computer.
If the previous steps do not solve the problem, remove and reinstall the
software. For more information, see remove and reinstall your hp psc
software on page 37.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 2110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2110 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2110

HP PSC 2110 User Manual - German - 76 pages

HP PSC 2110 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info