617379
33
Zoom out
Zoom in
Previous page
1/64
Next page
restore factory defaults
29
hp psc 2100 series
6 Pull the end of the latch toward you, press down until it stops, and then
release. Make sure the latch catches below the bottom tabs.
7 Close the print-carriage access door.
align cartridges The HP PSC prompts you to align cartridges every time you install or replace
a print cartridge. Aligning the cartridges ensures high-quality output.
To align the print cartridges when prompted:
1 Press Enter on the front panel.
Two pages are printed, one with instructions and one with patterns.
2 Follow the instructions on the instruction page, then place the page
with patterns on the glass and press Start Scan.
The cartrdges are aligned correctly.
To align the cartridges at any other time:
1 Press Setup until Maintenance appears, and then press Enter.
2 Press until Align Cartridge appears, and then press Enter.
Two pages are printed, one with instructions and one with patterns.
3 Follow the instructions on the instruction page, then place the page
with patterns on the glass and press Start Scan.
The cartrdges are aligned correctly.
clean the print
cartridges
Use this feature when the Self-Test Report shows streaking or white lines
through any of the colored bars. Do not clean print cartridges unnecessarily.
This wastes ink and shortens the life of the ink nozzles.
1 Press Setup until Maintenance appears, and then press Enter.
2 Press until Clean Cartridge appears, and then press Enter.
If copy or print quality still seem poor after you clean the print
cartridges, replace the print cartridge that is affected.
restore factory defaults
You can restore the original factory settings to what they were when you
purchased your HP PSC. You can perform this process from the front panel
only.
1 Press Setup until Maintenance appears, and then press Enter.
2 Press until Restore Defaults appears, and then press Enter.
The factory default settings are restored.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 2110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2110 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2110

HP PSC 2110 User Manual - German - 76 pages

HP PSC 2110 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info