617381
52
Zoom out
Zoom in
Previous page
1/64
Next page
get hp psc 2100 support
48
hp psc 2100 series
display your service ID, on the front panel, press
Enter and Start Copy,
Color at the same time, until SERV ID: and the number appear in the
front-panel display
Print a Self-Test Report. See print a self-test report on page 26 for
information on printing this report.
Make a color copy.
Be prepared to describe your problem in detail.
5 Call HP Customer Support. Be near your unit when you call.
call in the U.S.
during warranty
Call (208) 323-2551 Monday through Friday from 6:00 A.M. to 10:00 P.M.
Mountain Standard Time (MST) and Saturdays from 9:00 A.M. to 4:00 P.M. MST.
This service is free during the warranty period; however, your standard long-distance
phone charges still apply. A fee may apply outside the warranty period.
prepare your unit for shipment
If after contacting HP Customer Support or returning to the point of purchase, you
are requested to send your unit in for service, please follow the power off and rebox
steps below to avoid further damage to the HP product.
1 Turn on the unit.
Disregard steps 1 through 6, if your unit will not turn on and the print carriage
is in the home position. You will not be able to remove the ink cartridges.
Proceed to step 7.
2 Open the print-carriage access door.
3 Remove the print cartridges from their holders, and lower the latches.
Caution! Remove both print cartridges and lower both latches.
Failure to do so may damage your unit.
See replace the print cartridges on page 27 for information on removing the
print cartridges.
4 Place the print cartridges in an airtight bag so they will not dry out, and put
them aside (do not send them with the unit, unless instructed to by the HP
customer support call agent).
5 Turn off the unit.
6 Close the print-carriage access door.
7 Remove the front panel cover as follows:
a. Insert a small screw driver into the top right corner of the front panel
cover.
b. Gently pry the corner up and lift the front panel cover from the unit.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 2108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2108 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2108

HP PSC 2108 User Manual - German - 76 pages

HP PSC 2108 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info