617376
96
Zoom out
Zoom in
Previous page
1/134
Next page
The control panel display shows the wrong language
Solution Usually, you set the language and country/region when you first set
up the HP All-in-One. However, you can change these settings at any time by
using the following procedure:
1. Press Setup until Preferences appears, and then press OK.
2.
Press
until Set Language & Country/Region appears, and then press OK.
You are prompted with a list of languages. You can scroll through the list of
languages by pressing
or .
3. Press OK on the appropriate language.
4. When prompted, press OK to select Yes or Cancel to select No.
You are prompted with a list of countries/regions for the selected language.
5.
Press
to select the appropriate country/region, and then press OK.
6.
When prompted, press
to select Yes or No, and then press OK.
You can confirm the language and country/region by printing a Self-Test Report,
as follows:
1. Press Setup until Print Report appears, and then press OK.
2.
Press
until Self-Test Report appears, and then press OK.
The wrong measurements are showing in menus on the control panel display
Solution You might have selected the incorrect country/region when setting up
your HP All-in-One. The country/region you select determines the paper sizes
shown on the control panel display.
To change the country/region, you must first set the default language again.
Usually, you set the language and country/region when you first set up the HP All-
in-One. However, you can change these settings at any time by using the
following procedure:
1. Press Setup until Preferences appears, and then press OK.
2.
Press
until Set Language & Country/Region appears, and then press OK.
You are prompted with a list of languages. You can scroll through the list of
languages by pressing
or .
3. Press OK on the appropriate language.
4. When prompted, press OK to select Yes or Cancel to select No.
You are prompted with all the countries/regions for the selected language.
5.
Press
to select the appropriate country/region, and then press OK.
6.
When prompted, press
to select Yes or No, and then press OK.
Print a Self-Test Report to confirm the language and country/region:
1. Press Setup until Print Report appears, and then press OK.
2.
Press
until Self-Test Report appears, and then press OK.
I received a message on the control panel display to align the print cartridges
Cause The HP All-in-One prompts you to align cartridges every time you install
a new print cartridge.
User Guide 93
Troubleshooting information
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 1610 All-in-One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 1610 All-in-One in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 1610 All-in-One

HP PSC 1610 All-in-One User Manual - German - 152 pages

HP PSC 1610 All-in-One User Manual - Dutch - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info