480838
43
Zoom out
Zoom in
Previous page
1/64
Next page
you might need to wait a few minutes for the HP All-in-One to connect to your computer.
Otherwise, see Some of the icons are missing in the HP Solution Center or HP Image Zone.
Open the Printers dialog box and check to see that the HP All-in-One is listed.
Look in the system tray at the far right of the Windows taskbar for an HP All-in-One icon.
This indicates that the HP All-in-One is ready.
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Solution Double-click My Computer, double-click the CD-ROM icon, and then double-
click setup.exe.
The minimum system checks screen appears
Solution Click Details, and then correct the problem before attempting to install the
software.
A red X appears on the USB connect prompt
Solution Normally, a green check appears indicating that the plug and play is
successful. A red X indicates that the plug and play failed.
Do the following:
1. Verify that the control panel overlay is firmly attached, and then unplug the HP All-in-
One and then plug it in again.
2. Verify that the USB cable and power cord are plugged in.
Do not attach the USB cable to a keyboard or non-powered hub.
Verify that the USB cable is 3 meters (9.8 feet) or less in length.
If you have several USB devices attached to your computer, you might want to
unplug the other devices during the installation.
3. Continue with the installation and restart the computer when prompted.
4. Then open HP Solution Center and check for the key components (Scan Picture,
Scan Document, and HP Image Zone).
5. If these key components do not appear, remove the software and then reinstall it. For
more information, see Uninstall and reinstall the software.
I received a message that an unknown error has occurred
Solution Try to continue with the installation. If that doesn’t work, stop and then restart
the installation and follow the directions on the screen. If an error occurs, you might need to
uninstall and then reinstall the software. For information, see Uninstall and reinstall the
software.
Some of the icons are missing in the HP Solution Center or HP Image Zone
If these buttons or icons (Scan Picture, Scan Document, and HP Image Zone) do not
appear, your installation might not be complete.
Solution If your installation is incomplete, you might need to uninstall and then reinstall
the software. Do not simply delete the HP All-in-One program files from your hard drive.
Make sure to remove them properly. For more information, see Uninstall and reinstall the
software.
The Digital Imaging Monitor does not appear in the system tray
Solution If the Digital Imaging Monitor does not appear in the system tray, start the
HP Solution Center to check whether or not the key components (Scan Picture, Scan
Document, and HP Image Zone) are there. For more information, see the Use the HP
Solution Center section of the HP Image Zone Help that came with your software.
User Guide 39
Troubleshooting information
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC-1417 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC-1417 in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC-1417

HP PSC-1417 User Manual - German - 68 pages

HP PSC-1417 Installation Guide - Dutch - 12 pages

HP PSC-1417 User Manual - Dutch - 66 pages

HP PSC-1417 Installation Guide - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info