659229
2
Zoom out
Zoom in
Previous page
1/64
Next page
HP PSC 1400 All-in-One series
User Guide
Legal Information
© Copyright 2005 Hewlett-Packard
Development Company, L.P.
The information contained herein is
subject to change without notice.
Reproduction, adaptation or
translation without prior written
permission is prohibited, except as
allowed under copyright laws.
Adobe® and the Acrobat Logo® are
trademarks Adobe Systems
Incorporated.
Portions Copyright © 1989-2004
Palomar Software Inc.
The HP PSC 1400 All-in-One series
includes printer driver technology
licensed from Palomar Software, Inc.
www.palomar.com.
Windows®, Windows NT®, Windows
Me®, Windows XP®, and Windows
2000® are U.S. registered trademarks
of Microsoft Corporation.
Intel® and Pentium® are registered
trademarks of Intel Corporation and its
subsidiaries in the United States and
other countries.
Energy Star® and Energy Star logo®
are US registered marks of the United
States Environmental Protection
Agency.
First edition: March 2005
Notice
The only warranties for HP products
and services are set forth in the
express warranty statements
accompanying such products and
services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for
technical or editorial errors or
omissions contained herein.
The Hewlett-Packard Company shall
not be liable for incidental or
consequential damages in connection
with, or arising out of the furnishing,
performance, or use of this document
and the program material which it
describes.
Note: Regulatory information can be
found in the technical information
chapter of this guide.
It is not lawful in many places to make
copies of the following items. When in
doubt, check with a legal
representative first.
Governmental paper or
documents:
Passports
Immigration papers
Selective service papers
Identification badges,
cards, or insignias
Governmental stamps:
Postage stamps
Food stamps
Checks or drafts drawn on
Governmental agencies
Paper currency, traveler’s
checks, or money orders
Certificates of deposit
Copyrighted works
Safety information
Warning To prevent fire or shock
hazard, do not expose this product to
rain or any type of moisture.
Always follow basic safety precautions
when using this product to reduce risk
of injury from fire or electric shock.
Warning Potential shock hazard
1. Read and understand all
instructions in the Setup Guide.
2. Use only a grounded electrical
outlet when connecting the
device to a power source. If you
do not know whether the outlet
is grounded, check with a
qualified electrician.
3. Observe all warnings and
instructions marked on the
product.
4. Unplug this product from wall
outlets before cleaning.
5. Do not install or use this product
near water or when you are wet.
6. Install the product securely on a
stable surface.
7. Install the product in a protected
location where no one can step
on or trip over the power cord,
and where the power cord will
not be damaged.
8. If the product does not operate
normally, see the online
Troubleshooting help.
9. No operator-serviceable parts
inside. Refer servicing to
qualified service personnel.
10. Use in a well-ventilated area.
Warning This equipment will be
inoperable when main power fails.
Publication number: Q7286-90158
HP PSC 1400 All-in-One series
User Guide
Contents
1 HP All-in-One overview........................................................................................3
The HP All-in-One at a glance ...............................................................................3
Control panel overview ..........................................................................................4
Status light overview ..............................................................................................4
Use the HP Image Zone to do more with your HP All-in-One ................................6
Find more information ............................................................................................6
Connection information ..........................................................................................7
2 Load originals and load paper.............................................................................9
Load an original .....................................................................................................9
Choose papers for printing and copying ................................................................9
Load paper ..........................................................................................................10
Avoid paper jams .................................................................................................13
3 Use the copy features........................................................................................15
Set the copy paper type .......................................................................................15
Increase copy speed or quality ............................................................................16
Make multiple copies ...........................................................................................16
Make a borderless copy of a photo ......................................................................17
Resize an original to fit onto letter or A4 paper ....................................................17
Stop copying ........................................................................................................18
4 Print from your computer..................................................................................19
Print from a software application .........................................................................19
Make the HP All-in-One the default printer ..........................................................20
Stop a print job ....................................................................................................20
5 Use the scan features......................................................................................... 21
Scan from the control panel .................................................................................21
Adjust the preview image ..................................................................................... 22
Stop scanning ......................................................................................................22
6 Use HP Instant Share.........................................................................................23
Overview ..............................................................................................................23
Get started ...........................................................................................................23
Send images using your computer ......................................................................23
7 Order supplies....................................................................................................27
Order paper, transparency film, or other media ...................................................27
Order print cartridges ...........................................................................................27
Order other supplies ............................................................................................27
8 Maintain your HP All-in-One..............................................................................29
Clean the HP All-in-One ......................................................................................29
Check the estimated ink levels ............................................................................29
Print a self-test report ..........................................................................................30
Work with print cartridges ....................................................................................30
9 Troubleshooting information.............................................................................35
Before you call HP Support .................................................................................35
View the Readme file ...........................................................................................35
Setup troubleshooting ..........................................................................................35
Operational troubleshooting .................................................................................41
User Guide 1
Device update ......................................................................................................42
10 Get HP support ..................................................................................................43
Get support and other information from the Internet ............................................43
Warranty support .................................................................................................43
HP customer support ...........................................................................................43
Access your serial number and service ID ........................................................... 44
Contact HP ..........................................................................................................44
Call HP Korea customer support .........................................................................45
Prepare your HP All-in-One for shipment ............................................................45
Hewlett-Packard LIMITED WARRANTY STATEMENT .......................................46
11 Technical information .......................................................................................49
System requirements ...........................................................................................49
Paper specifications ............................................................................................49
Print specifications ...............................................................................................50
Copy specifications ..............................................................................................51
Scan specifications ..............................................................................................51
Physical specifications .........................................................................................52
Power specifications ............................................................................................52
Environmental specifications ...............................................................................52
Additional specifications ......................................................................................52
Environmental product stewardship program ......................................................52
Regulatory notices ...............................................................................................54
Index...........................................................................................................................57
2 HP PSC 1400 All-in-One series
1
HP All-in-One overview
Many HP All-in-One functions can be accessed directly, without turning on your
computer. Tasks such as making a copy or printing can be accomplished quickly and
easily from your HP All-in-One.
This chapter describes the HP All-in-One hardware features, control-panel functions,
and how to access the HP Image Zone software.
Tip You can do more with your HP All-in-One by using the HP Image Zone or
HP Solution Center software installed on your computer. The software
provides enhanced copy, scan, and photo functionality. For more information,
see the onscreen HP Image Zone Help and Use the HP Image Zone to do
more with your HP All-in-One.
The HP All-in-One at a glance
1 Control panel
2 Paper tray
3 Paper tray extender
4 Paper-width guide
5 Print-carriage access / front clean-out door
6 Glass
7 Lid
8 Rear clean-out door
9 Rear USB port
10 Power connection
User Guide 3
HP All-in-One overview
Control panel overview
1 On / Resume button: Turns the power on or off. In certain situations (for example, after clearing a
paper jam), this button resumes printing.
2 Check Paper light: Indicates the need to load paper or remove a paper jam.
3 Check Print Cartridge light: Indicates the need to reinsert the print cartridge, replace the print
cartridge, or close the print-carriage access door.
4
Cancel button: Stops a job, exit a menu, or exit settings.
5 Copies button: Specifies the desired number of copies.
6 Size button: Keeps the image size as it is (100%) or reduce or enlarge it to fit the size of the paper.
7 Paper Type button: Changes the paper type setting to match the type of paper loaded in the paper
tray (plain or photo paper). The default setting is plain paper.
8
Start Copy Black button: Starts a black copy job.
9
Start Copy Color button: Starts a color copy job.
10
Scan button: Starts a scan job.
Status light overview
Several indicator lights inform you of the status of your HP All-in-One. The following
table describes common situations and explains what the lights mean.
For more information about status lights and resolving issues, see Troubleshooting
information.
The lights on the HP All-in-One flash in special sequences to inform you of various
error conditions. Refer to the following table for information on solving your error
condition based on which lights are on or blinking on your HP All-in-One.
Chapter 1
4 HP PSC 1400 All-in-One series
HP All-in-One overview
1 On light
2 Check Paper light
3 Check Print Cartridge light
4 Size lights
5 Paper Type lights
Description
Off Off Off Both off Both off The device is turned off.
Off Off Off 1 On,
1 Off
1 On,
1 Off
The device is processing a
job, such as print, scan
copy, or alignment.
Blink faster
for 3 seconds
and then On
Off Off Off 1 On,
1 Off
The device is busy.
Blink for 20
seconds and
then On
Off Off 1 On,
1 Off
1 On,
1 Off
The Scan button was
pressed and there was no
response from the computer.
On Blinking Off 1 On,
1 Off
1 On,
1 Off
The device is out of
paper.
The device has a paper
jam.
The paper size setting
does not match the
paper size detected in
the paper tray.
On Off Blinking 1 On,
1 Off
1 On,
1 Off
The print-carriage
access door is open.
The print cartridges are
missing or not seated
correctly.
The tape was not
removed from the print
cartridge.
The print cartridge is
not intended for use in
this device.
The print cartridge
might be defective.
Blinking Blinking Blinking Both off Both off The device has a scanner
failure.
User Guide 5
HP All-in-One overview
Description
Blinking Blinking Blinking Both
blinking
Both
blinking
The device has a fatal error.
Use the HP Image Zone to do more with your HP All-in-
One
The HP Image Zone software is installed on your computer when you set up your
HP All-in-One. For further information, see the Setup Guide that came with your device.
The entry point for the software varies by operating system (OS). For example, if you
have a PC and are running Windows, the entry point is the HP Solution Center. If
you have a Mac OS X v10.2.3 or later, the entry point is the HP Image Zone window.
Regardless, the entry point serves as the launching pad for the HP Image Zone
software and services.
Note In Windows, you may have the option of installing two versions of the
software. If you choose HP Image Zone Express, you will receive a more
basic set of image editing features and some features mentioned may not be
available.
Access the HP Image Zone software (Windows)
Open the HP Solution Center from the desktop icon or the Start menu. The
HP Image Zone software features appear in the HP Solution Center.
Access the HP Image Zone software (Mac)
When you install the HP Image Zone software, the HP Image Zone icon is placed in
the Dock. Click the HP Image Zone icon in the Dock. The HP Image Zone window
displays only the HP Image Zone features that are appropriate for the selected device.
Note If you install more than one HP All-in-One, an HP Image Zone icon for
each device is displayed in the Dock. For example, if you have an HP scanner
and an HP All-in-One installed, two HP Image Zone icons are present in the
Dock, one for each device. However, if you installed two of the same kind of
device (for example, two HP All-in-Ones) only one HP Image Zone icon is
displayed in the Dock to represent all devices of that type.
Click the HP Image Zone icon in the Dock.
The HP Image Zone window appears.
The HP Image Zone window displays only the HP Image Zone features that are
appropriate for the selected device.
Find more information
A variety of resources, both printed and onscreen, provide information about setting
up and using your HP All-in-One.
Setup Guide
The Setup Guide provides instructions for setting up your HP All-in-One and
installing software. Make sure that you follow the steps in order.
Chapter 1
(continued)
6 HP PSC 1400 All-in-One series
HP All-in-One overview
If you have problems during setup, see Troubleshooting in the last section of the
Setup Guide, the Troubleshooting section in the User Guide, or visit www.hp.com/
support.
HP Image Zone Help
The HP Image Zone Help provides detailed information on using the software for
your HP All-in-One.
The Get step-by-step instructions topic provides information on using the
HP Image Zone software with HP devices.
The Explore what you can do topic provides more information about the
practical and creative things that you can do with the HP Image Zone
software and your HP devices.
If you need further assistance or want to check for HP software updates, see
the Troubleshooting and support topic.
Readme
The Readme file contains the most recent information which might not be found
in other publications. Install the software to access the Readme file.
Connection information
Your HP All-in-One comes with a USB port so you can connect directly to a computer
using a USB cable. You can also share your printer with up to five computers over an
existing Ethernet network using a Windows computer or a Mac as a print server. The
computer to which the HP All-in-One is directly connected has access to all of its
features. The other computers can only print.
Connect using a USB cable
You can connect one computer using a USB cable. The USB port is located on the
rear of the HP All-in-One. Detailed instructions for connecting a computer to your
HP All-in-One with a USB cable are included in the Setup Guide.
Use printer sharing (Windows)
If your computer is on a network and another computer on the network has an HP All-
in-One connected to it by means of a USB cable, you can use that device as your
printer using Windows printer sharing. The computer directly connected to the HP All-
in-One acts as the host for the printer and can use all the features. Your computer,
which is referred to as a client, can only print. All other functions must be performed
on the host computer.
To enable Windows printer sharing, refer to the user guide that came with your
computer or the Windows onscreen Help.
Use printer sharing (Mac OS X)
If your computer is on a network and another computer on the network has an HP All-
in-One connected to it by means of a USB cable, you can use that device as your
printer using printer sharing. The computer directly connected to the HP All-in-One
acts as the host for the printer and can use all the features. Your computer, which is
User Guide 7
HP All-in-One overview
referred to as a client, can only print. All other functions must be performed on the
host computer.
1. On the host computer and all computers who want to use the printer, select
System Preferences in the Dock.
2. Select Sharing.
3. From the Services tab, click the Printer Sharing box.
4. From the View menu, select Print & Fax.
5. Select the printer model in the Selected printer in Print Dialog menu.
6. Click the Share my printers with other computers box.
Chapter 1
8 HP PSC 1400 All-in-One series
HP All-in-One overview
2
Load originals and load paper
This chapter provides instructions for loading originals on the glass to copy or scan,
choosing the best paper type for your job, loading paper in the paper tray, and
avoiding paper jams.
Load an original
You can copy or scan up to letter- or A4-size originals by loading them on the glass.
Note Many of the special features will not work correctly if the glass and lid
backing are not clean. For more information, see Clean the HP All-in-One.
1. Lift the lid and place your original face down on the left front corner of the glass.
2. Close the lid.
Choose papers for printing and copying
You can use many types and sizes of paper in your HP All-in-One. Review the
following recommendations to get the best printing and copying quality. Whenever you
change paper types or sizes, remember to change those settings.
Recommended papers
For the best print quality, use HP papers that are specifically designed for the type of
project you are printing. If you are printing photos, for example, load glossy or matte
photo paper in the paper tray. If you are printing a brochure or presentation, use a
type of paper specifically designed for that purpose.
For more information about HP papers, see the onscreen HP Image Zone Help, or go
to www.hp.com/support/inkjet_media.
Note At this time, this portion of the site is available in English only.
Papers to avoid
Using inappropriate papers can cause paper jams or poor print quality.
User Guide 9
Load originals and load paper
Avoid these papers in your HP All-in-One
Paper that is too thin, has a slick texture, or that stretches easily
Highly textured stock, such as linen (it might not print evenly, and the ink can
bleed into these papers)
Multi-part forms, such as duplicate and triplicate forms (they can wrinkle or get
stuck and the ink is more likely to smear)
Envelopes with clasps or windows (they can get stuck in the rollers and they can
cause paper jams)
Banner paper
In addition, do not COPY to these papers
Any size paper other than letter, A4, 10 x 15 cm (4 x 6 inch), or Hagaki
Envelopes
Transparency film
Labels
Load paper
This section describes the procedure for loading different types and sizes of paper
into your HP All-in-One for your copies or prints.
Load full-size paper
1. Lower the paper tray and, if necessary, squeeze and hold the tab on top of the
paper-width guide and slide the paper-width guide to the outermost position.
Caution Legal paper might get caught on the paper tray extender if it is
fully extended when you print onto legal paper. To avoid a paper jam
when using legal-size paper, do not open the paper tray extender.
1 Paper tray door
2 Paper-width guide
3 Paper tray extender
2. Tap a stack of paper on a flat surface to align the edges, and then check the
paper for the following:
Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
Make sure all the paper in the stack is the same size and type.
3. Insert the stack of paper into the paper tray with the short edge forward and the
print side down. Slide the stack of paper forward until it stops.
Note 1 Make sure all paper is of the same size and type. Do not overload
the paper tray; make sure the stack of paper lies flat in the paper tray and
fits under the tab of the paper-width guide.
Chapter 2
10 HP PSC 1400 All-in-One series
Load originals and load paper
Note 2 Do not push the paper in too far. This might cause the HP All-in-
One to select several pieces of paper at once.
Tip If you are using letterhead, insert the top of the page first with the
print side down. For more help on loading full-size paper and letterhead,
refer to the diagram engraved in the base of the paper tray.
4. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward until it stops at the edge of the paper.
Load 10 x 15 cm (4 x 6 inch) photo paper
You can load 10 x 15 cm (4 x 6 inch) photo paper into the paper tray of your HP All-in-
One. For best results, follow these recommendations.
Use a recommended type of 10 x 15 cm (4 x 6 inch) photo paper. For more
information, see the onscreen HP Image Zone Help.
Set the paper type and paper size before copying or printing. For information on
changing paper settings, see the onscreen HP Image Zone Help.
Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper
flat in a resealable bag. If the paper is not stored properly, extreme changes in
temperature and humidity might result in curled paper that does not work well
in the HP All-in-One.
1. Remove all paper from the paper tray.
2. Insert the stack of photo paper into the far right side of the paper tray with the
short edge forward and the print side down. Slide the stack of photo paper
forward until it stops.
3. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of photo paper until it stops.
Do not overload the paper tray. Make sure the stack of photo paper lies flat in the
paper tray and fits under the tab of the paper-width guide.
Tip If the photo paper you are using has perforated tabs, load the photo
paper so that the tabs are closest to you.
User Guide 11
Load originals and load paper
Load envelopes, postcards, and Hagaki
You can load envelopes, postcards, or Hagaki into the paper tray.
For the best results, set the paper type and size before printing or copying. For more
information, see the onscreen HP Image Zone Help.
Tip You cannot copy onto plain, small-size paper, only photo paper. You
must print onto plain postcards, plain Hagaki, and envelopes.
Note For specific details on how to format text for printing on envelopes,
consult the help files in your word processing software. For best results,
consider using a label for the return address on envelopes.
1. Remove all paper from the paper tray.
2. Insert the stack of cards or envelopes into the far right side of the paper tray with
the short edge forward and the print side down. Envelope flaps should be toward
the left. Slide the stack forward until it stops.
3. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack until it stops.
Load other types of paper
The following table provides guidelines for loading certain types of paper. For best
results, adjust the paper settings each time you change paper sizes or paper types.
Note Not all paper sizes and paper types can be used with all the functions
on the HP All-in-One. Some paper sizes and paper types can only be used if
you are starting a print job from the Print dialog box in a software application.
They are not available for copying. Papers that are only available for printing
from a software application are indicated as such in the following table.
Chapter 2
12 HP PSC 1400 All-in-One series
Load originals and load paper
Paper Tips
HP papers HP Premium Paper: Locate the gray arrow on the nonprinting side
of the paper, and then slide the paper into the paper tray with the
arrow side facing up.
HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip (with arrows and the HP logo) is on top
and is going into the paper tray first. (For printing from a software
application only.)
Note The HP All-in-One cannot automatically detect transparency
film. For best results, set the paper type in the software application
to transparency film before printing on transparency film.
HP Matte Greeting Cards, HP Photo Greeting Cards, or
HP Textured Greeting Cards: Insert a small stack of HP greeting
card paper into the paper tray with the print side down and slide
the stack of cards forward until it stops. (For printing from a
software application only.)
Labels
(for printing from a
software application
only)
Always use letter or A4 label sheets designed for use with HP inkjet
devices (such as HP or Avery inkjet labels), and make sure that the
labels are no more than two years old. Labels on older sheets might
peel off in the HP All-in-One, causing paper jams.
Note Insert a stack of label sheets on top of a stack of full-size paper,
label side down. Do not insert one sheet at a time.
1. Fan the stack of labels to make sure none of the pages are
sticking together.
2. Place a stack of label sheets on top of full-size plain paper in the
paper tray, label side down. Do not insert labels one sheet at a time.
Avoid paper jams
To help avoid paper jams, follow these guidelines:
Prevent curled or wrinkled paper by storing all unused paper flat in a resealable
bag.
Remove printed papers from the paper tray frequently.
Ensure that paper loaded in the paper tray lays flat and the edges are not bent or
torn.
Do not combine different paper types and paper sizes in the paper tray; the entire
stack of paper in the paper tray must be the same size and type.
Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make
sure the paper guide does not bend the paper in the paper tray.
Do not force paper too far forward in the paper tray.
Use paper types that are recommended for your HP All-in-One. For more
information, see Choose papers for printing and copying.
For more information about clearing paper jams, see Paper troubleshooting.
User Guide 13
Load originals and load paper
Chapter 2
14 HP PSC 1400 All-in-One series
Load originals and load paper
3
Use the copy features
The HP All-in-One allows you to produce high-quality color and black-and-white
copies on a variety of paper types. You can enlarge or reduce the size of an original to
fit a specific paper size, adjust the copy quality, and make high-quality copies of
photos, including borderless copies.
Tip Copies made from the control panel are automatically made using Best
quality.
Set the copy paper type
You can set the paper type for copying to either Plain or Photo.
Plain Photo Start Copy Black Start Copy Color
1. Load your original face down on the left front corner of the glass.
2. Press the Paper Type button to select either Plain or Photo.
3. Press Start Copy Black or Start Copy Color.
Refer to the following table to determine which paper type setting to choose based on
the paper loaded in the paper tray.
Paper type
Control panel setting
Copier paper or letterhead Plain
HP Bright White Paper Plain
HP Premium Plus Photo Paper, Glossy Photo
HP Premium Plus Photo Paper, Matte Photo
HP Premium Plus 4 x 6 inch Photo Paper Photo
HP Photo Paper Photo
HP Everyday Photo Paper Photo
HP Everyday Photo Paper, Semi Gloss Photo
Other photo paper Photo
HP Premium Paper Plain
Other inkjet paper Plain
Plain Hagaki Plain
User Guide 15
Use the copy features
The HP Image Zone has many tools that you can use to edit your scanned image.
You can improve the overall image quality by adjusting the brightness, sharpness,
color tone, or saturation. You can also crop, straighten, rotate, or resize the image.
When the scanned image looks just the way you want it, you can open it in another
application, send it through e-mail, save it to a file, or print it. For more information on
using the HP Image Zone, see the onscreen HP Image Zone Help.
Adjust the preview image
You can use the tools in the HP Scan Pro window to modify a preview image. Any
changes that you make, such as brightness, image type, resolution, and more apply
only to this scan session.
You can do the following using the HP Scan Pro software:
Select a portion of the image
Change the image type and quality
Change the resolution
Crop or straighten the image
Adjust the brightness or contrast
Adjust the color or saturation
Sharpen or blur the image
Rotate the image
Resize the image
For more information, see the HP Scan Pro section of the HP Image Zone Help.
You can make additional changes to the scan in the HP Image Zone software. For
more information on the HP Image Zone editing tools, see the HP Image Zone Help.
Stop scanning
Cancel
To stop scanning, press the Cancel button on the control panel, or in the
HP Image Zone software, click Cancel.
Chapter 5
22 HP PSC 1400 All-in-One series
Scan
6
Use HP Instant Share
HP Instant Share makes it easy to share photos with family and friends. Using the
HP Image Zone software installed on your computer, select one or more photos to
share, select a destination for your photos, and then send the photos. You can even
upload your photos to an online photo album or an online photo finishing service.
Availability of services varies by country/region.
With HP Instant Share E-mail, family and friends always get photos they can view -
no more large downloads or images that are too big to open. An e-mail message with
thumbnail images of your photos is sent with a link to a secure web page where family
and friends can easily view, share, print, and save the photos.
Overview
Use HP Instant Share to send scanned images or documents from your HP All-in-One
to a destination of your choice. The destination, for example, can be an e-mail
address, an online photo album, or an online photo finishing service. Availability of
services varies by country/region.
Note You can also send images to a friend's or relative's network-connected
HP All-in-One or photo printer. To send to a device, you must have an HP
Passport user ID and password. The receiving device must be set up and
registered with HP Instant Share. You will also need to obtain the name the
recipient assigned to the receiving device.
For more information on scanning an image, see Use the scan features.
Get started
You must have the following to use HP Instant Share with your HP All-in-One:
An HP All-in-One connected to a computer
Broadband Internet access through the computer to which the HP All-in-One is
connected
HP Image Zone software installed on your computer. Mac users have an
HP Instant Share client application.
Send images using your computer
The HP Image Zone software lets you select and edit one or more images, and then
access HP Instant Share to select a service (for example, HP Instant Share E-mail)
and send your images. At a minimum, you can share images through the following:
HP Instant Share E-mail (send to an e-mail address)
HP Instant Share E-mail (send to a device)
Online Albums
Online photo finishing (availability varies by country/region)
Note For more information on using Instant Share and the HP Image Zone
software or the HP Instant Share client application (Mac), see the onscreen
HP Image Zone Help.
User Guide 23
Use HP Instant Share
Send images using the HP Image Zone software (Windows)
1. Double-click the HP Image Zone icon on your desktop.
2. Select one or more images from the folder(s) in which they are stored.
Note Use the HP Image Zone image editing tools to edit your images
and achieve the results you want. For more information on selecting
images and using the editing tools, see the onscreen HP Image Zone Help.
3. Click the HP Instant Share tab.
4. In the Services area of the HP Instant Share tab, click the link or icon of the
service you want to use to send your scanned image.
5. From the HP Instant Share E-mail service, you can do any of the following:
Send an e-mail message with thumbnail images of your photos which can be
viewed, printed, and saved over the Internet.
Open and maintain an e-mail address book. Click Address Book, register
with HP Instant Share, and create an HP Passport account.
Send your e-mail message to multiple addresses. Click the related link.
Send a collection of images to a friend's or relative's network-connected
device. Enter the name assigned to the device by the recipient in the E-mail
address box followed by @send.hp.com. You will be prompted to sign in to
HP Instant Share with your HP Passport userid and password.
Note If you have not previously set up HP Instant Share, click I need
an HP Passport account on the Sign in with HP Passport screen.
Send images using the HP Instant Share client application software (Mac)
1. Select the HP Image Zone icon from the Dock.
The HP Image Zone opens on your desktop.
2. In the HP Image Zone, click the Services button at the top of the window.
A list of applications appears in the lower part of the HP Image Zone.
3. Choose HP Instant Share from the list of applications in the lower part of the
HP Image Zone.
The HP Instant Share client application software opens on your computer.
4. Use the + button to add an image to the window, or the button to remove an
image.
5. Make sure the images you want to share appear in the HP Instant Share window.
6. Click Continue and follow the onscreen instructions.
7. From the HP Instant Share services list, select the service you want to use to
send your scanned image and follow the onscreen instructions.
8. From the HP Instant Share E-mail service, you can do any of the following:
Send an e-mail message with thumbnail images of your photos which can be
viewed, printed, and saved over the Internet.
Open and maintain an e-mail address book. Click Address Book, register
with HP Instant Share, and create an HP Passport account.
Send your e-mail message to multiple addresses. Click the related link.
Send a collection of images to a friend's or relative's network-connected
device. Enter the name assigned to the device by the recipient in the E-mail
address box followed by @send.hp.com. You will be prompted to sign in to
HP Instant Share with your HP Passport userid and password.
Chapter 6
24 HP PSC 1400 All-in-One series
Use HP Instant Share
Note If you have not previously set up HP Instant Share, click I need an
HP Passport account on the Sign in with HP Passport screen.
User Guide 25
Use HP Instant Share
Chapter 6
26 HP PSC 1400 All-in-One series
Use HP Instant Share
7
Order supplies
You can order recommended types of HP paper and print cartridges online from the
HP website.
Order paper, transparency film, or other media
Order print cartridges
Order other supplies
Order paper, transparency film, or other media
To order media such as HP Premium Paper, HP Premium Plus Photo Paper, or
HP Premium Inkjet Transparency Film go to www.hp.com. If prompted, choose your
country/region, follow the prompts to select your product, and then click one of the
shopping links on the page.
Order print cartridges
Print cartridge reorder numbers vary by country/region. If the reorder numbers listed in
this guide do not match the numbers on the print cartridges currently installed in your
HP All-in-One, order new print cartridges with the same numbers as those you
currently have installed. Your HP All-in-One supports the following print cartridges.
Print cartridges
HP reorder number
HP black print cartridge #21 black print cartridge
HP tri-color print cartridge #22 color print cartridge
Locate the reorder numbers for the print cartridges your device supports by doing the
following:
For Windows users: In the HP Solution Center or HP Image Zone, click
Settings, point to Print Settings, and then click Printer Toolbox. Click the
Estimated Ink Levels tab, and then click Print Cartridge Ordering Information.
For Mac users: In the HP Image Zone, choose Settings, choose Maintain
Printer, if prompted, select your HP All-in-One, and then click Utilities. From the
pop-up menu, choose Supplies.
Or, you can contact a local HP reseller or go to www.hp.com/support to confirm the
correct print cartridge reorder numbers for your country/region.
Order other supplies
To order other supplies, such as HP All-in-One software, a copy of the User Guide, a
Setup Guide, or other customer-replaceable parts, call the appropriate number below:
In the U.S. or Canada, dial 1-800-474-6836 (1-800-HP invent).
In Europe, dial +49 180 5 290220 (Germany) or +44 870 606 9081 (U.K.).
To order HP All-in-One software in other countries/regions, call the phone number for
your country/region. The numbers listed below are current as of the publication date of
this guide. For a list of current ordering numbers, go to www.hp.com. If prompted,
User Guide 27
Order supplies
8
Maintain your HP All-in-One
The HP All-in-One requires little maintenance. Sometimes you might want to clean the glass and
lid backing to remove surface dust and ensure that your copies and scans remain clear. You will
also need to replace, align, or clean your print cartridges occasionally. This chapter provides
instructions for keeping your HP All-in-One in top working condition. Perform these simple
maintenance procedures as necessary.
Clean the HP All-in-One
Fingerprints, smudges, hair, and other debris on the glass or lid backing slow down performance
and affect the accuracy of special features such as Fit to Page. To ensure that your copies and
scans remain clear, you might need to clean the glass and lid backing. You might also want to
dust the exterior of the HP All-in-One.
Clean the glass
1. Turn off the HP All-in-One, unplug the power cord, and raise the lid.
2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass
cleaner.
Warning Do not use abrasives, acetone, benzene, or carbon tetrachloride on the
glass; they can damage it. Do not place or spray liquid directly on the glass; the
liquid might seep under the glass and damage the device.
3. Dry the glass with a chamois or cellulose sponge to prevent spotting.
Clean the lid backing
1. Turn off the HP All-in-One, unplug the power cord, and raise the lid.
2. Gently clean the white document backing with a soft cloth or sponge slightly moistened with
a mild soap and warm water. Do not scrub.
3. Dry the backing with a chamois or soft cloth.
Caution Do not use paper-based wipes, as these might scratch the backing.
4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol,
and wipe the backing thoroughly with a damp cloth to remove any residual alcohol.
Caution Be careful not to spill alcohol on the glass or painted parts of the HP All-
in-One, as this might damage the device.
Clean the exterior
Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the case. The
interior of the HP All-in-One does not require cleaning. Keep fluids away from the control panel
and the interior of the HP All-in-One.
Caution To avoid damage to painted parts of the HP All-in-One, do not use alcohol or
alcohol-based cleaning products on the control panel, lid, or other painted parts of the
device.
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to replace a
print cartridge. The ink supply level shows an estimate of the amount of ink remaining in the print
cartridges.
User Guide 29
Maintain your HP All-in-One
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 1402 All-in-One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 1402 All-in-One in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 1402 All-in-One

HP PSC 1402 All-in-One Installation Guide - English - 8 pages

HP PSC 1402 All-in-One Installation Guide - German - 12 pages

HP PSC 1402 All-in-One User Manual - German - 68 pages

HP PSC 1402 All-in-One Installation Guide - Dutch - 12 pages

HP PSC 1402 All-in-One User Manual - Dutch - 66 pages

HP PSC 1402 All-in-One User Manual - French - 70 pages

HP PSC 1402 All-in-One Installation Guide - French - 12 pages

HP PSC 1402 All-in-One Installation Guide - Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info