Manual HP Pro X2 612 G1 - Windows 7 (page 78 of 94) (English)

604833

Zoom out

Zoom in

1/94

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the

download is complete. If no instructions are revealed, follow these steps:

1. Select Start > Computer.

2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

4. Double-click the file that has an .exe extension (for example,

filename

.exe).

The BIOS installation begins.

5. Complete the installation by following the on-screen instructions.

NOTE: After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Synchronizing the tablet and keyboard

When you attach the tablet to the power keyboard and restart the computer, the BIOS checks to see

if the Embedded Controller firmware on the power keyboard needs to be synchronized, and will start

the synchronization. If the synchronization is interrupted, a notification screen displays for 10 seconds

before the computer restarts and attempts to synchronize again.

NOTE: The Embedded Controller firmware will only synchronize if the tablet or power keyboard

battery is more than 50% charged, or if you're connected to AC power.

Using MultiBoot

About the boot device order

As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility,

which is enabled at the factory, controls the order in which the system selects a boot device. Boot

devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and

USB devices. Boot devices contain bootable media or files that the computer needs to start and

operate properly.

NOTE: Some boot devices must be enabled in Computer Setup before they can be included in the

boot order.

You can change the order in which the computer searches for a boot device by changing the boot

order in Computer Setup. You can also press esc or the volume down button while the “Hold the

Volume Down button to enter the BIOS Startup Menu” message is displayed at the bottom of the

screen,, and then press f9. Pressing f9 displays a menu that shows the current boot devices and

allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to prompt

you for a boot location each time the computer turns on or restarts.

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:

68 Chapter 12 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HP Pro X2 612 G1 - Windows 7 in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HP Pro X2 612 G1 - Windows 7 Manual

Product: