502901
7
Zoom out
Zoom in
Previous page
1/96
Next page
7
Fixing connectivity issues
Run a Wireless Network Testtocheckdiagnosticandcongurationinformation.Todothis:
1. On the HP Photosmart control panel, press the Wireless button to display the Wireless menu
on the printer display.
2. Select Run Wireless Network Test on the display.
3. The Wireless Network Test Report is automatically printed.
You may have picked the wrong network or typed in your network name (SSID)
incorrectly.
Check these settings to ensure that they are correct.
You may have typed in your wireless password (WPA passphrase or WEP key)
incorrectly.
If you are using encryption on your network, you’ll need to enter a key. These are
case-sensitive so be sure to enter them correctly. These settings might be found for you
automatically during software installation.
If the network name (SSID) or the WPA passphrase/WEP key are not found automatically
during installation, and you don’t already know them, you can download the Network
Diagnostic Utility, which can help you locate them.
The Network Diagnostic Utility runs on computers with Windows XP SP3, Vista, or
Windows 7. The computer should also be wirelessly connected to your network. To
download the Network Diagnostic Utility, go to: www.hp.com/go/wirelessprinting.
You may have a router problem.
Try restarting both the printer and the router by turning off the power on each. Then, turn
them on again.
Your computer may not be connected to your network.
Make sure that the computer is connect to the same network to which the HP Photosmart is
connected.
Your computer may be connected to a Virtual Private Network (VPN).
Temporarily disconnect from the VPN before proceeding with the installation. Being
connected to a VPN is like being on a different network. You will need to disconnect from
the VPN to access the printer over the home network.
Security software may be blocking communication.
Securitysoftware(rewall,anti-virus,anti-spyware)installedonyourcomputermaybe
blocking communication between the printer and the computer. An HP diagnostic utility
runs automatically during installation and can provide messages about what might be
blockedbyarewall.Trytemporarilydisablingyourrewall,anti-virus,oranti-spyware
applicationstoseeifyoucannishtheinstallationsuccessfully.Forfurthersupport,goto:
www.hp.com/go/wirelessprinting to download the Network Diagnostic Utility, then run it.
You should re-enable the security applications after installation is complete.
SetupyourrewallsoftwaretoallowcommunicationoverUDPport427(Windows).
After software installation
If your printer has been successfully installed, but you are having trouble printing:
Turn off the router, printer, and computer. Then, turn on router, printer, and computer -- in
that order.
If powering down and up doesn’t solve the problem, run the Network Diagnostic Utility
(Windows):
Go to: www.hp.com/go/wirelessprinting to download the Network Diagnostic Utility,
then run it.
English
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Photosmart Plus e-All-in-One B210 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Photosmart Plus e-All-in-One B210 series in the language / languages: All languages as an attachment in your email.

The manual is 36,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Photosmart Plus e-All-in-One B210 series

HP Photosmart Plus e-All-in-One B210 series User Manual - English - 68 pages

HP Photosmart Plus e-All-in-One B210 series User Manual - German - 70 pages

HP Photosmart Plus e-All-in-One B210 series User Manual - Dutch - 70 pages

HP Photosmart Plus e-All-in-One B210 series User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info