563891
33
Zoom out
Zoom in
Previous page
1/39
Next page
To check a wireless connection
1. Make sure that the wireless radio on your computer is turned on.
2. If you are not using a unique network name (SSID), then it is possible that your wireless computer
could be connected to a nearby network that is not yours. The following steps can help you
determine if your computer is connected to your network.
a. Depending on your operating system:
Windows XP: Click Start, point to Control Panel, point to Network Connections, and
then select View/Details.
OR
Windows XP: Click Start, point to Settings, point to Control Panel, point to Network
Connections, and then select View/Details.
Windows Vista: Click Start, point to Control Panel, point to Network Connections,
and then click View Network Status and Tasks.
Leave the network dialog box open while you continue to the next step.
b. Disconnect the power cord from the wireless router. The connection status of your computer
should change to Not Connected.
c. Reconnect the power cord to the wireless router. The connection status should change to
Connected.
If you are unable to get your computer connected to your network, contact the person who set up
your network or the router manufacturer as there might be a hardware issue with either your router
or computer.
If you are able to access the Internet, you can also access the HP Network Assistant at
http://
www.hp.com/sbso/wireless/tools-setup.html?jumpid=reg_R1002_USEN for help in setting up a
network.
Step 2: Make sure that the HP All-in-One is connected to your network
If your product is not connected to the same network as your computer, you will not be able to use
the product over the network. Follow the steps described in this section to find out if your product is
actively connected to the correct network.
A: Make sure the product is on the network
To see if the product is connected to the network:
If the product is connected to a wired (Ethernet) network, check the two Ethernet indicator lights
on the top and bottom of the RJ-45 Ethernet jack on the back of the product. The lights indicate
the following:
Top light: If the light is lit solid green, the product is connected to the network, and
communications have been established. If the light is off, there is no network connection.
Bottom light: If the yellow light flashes, data is being sent or received by the product over
the network.
If the product is connected to a wireless network, print the product Network Configuration Page,
and then check the Network Status and URL.
To print the Network Configuration Page
a.Press Setup.
b. Press the down arrow button until Network is highlighted, and then press OK.
c. Press the down arrow button until View Network Settings is highlighted, and then press
OK.
d. Press the down arrow button until Print Network Configuration Page is highlighted, and
then press OK.
This prints the Network Configuration Page.
Network troubleshooting 31
Troubleshooting and support
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Photosmart C6340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Photosmart C6340 in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Photosmart C6340

HP Photosmart C6340 User Manual - German, Dutch - 169 pages

HP Photosmart C6340 User Manual - Dutch - 44 pages

HP Photosmart C6340 User Manual - French, Italian - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info