563891
8
Zoom out
Zoom in
Previous page
1/39
Next page
CAUTION: To prevent other users from accessing your wireless network, HP
strongly recommends using a password or passphrase (Wi-Fi Protected Access
(WPA) or Wired Equivalent Privacy (WEP) security) and a unique network name
(Service set identifier (SSID)) for your wireless router. Your wireless router might have
been shipped with a default network name, which is typically the manufacturer name.
If you use the default network name, your network can be easily accessed by other
users using the same default network name (SSID). It also means that the HP All-in-
One might accidently connect to a different wireless network in your area which uses
the same network name. If this happens you will not be able to access the HP All-in-
One. For more information on how to change the network name, see the
documentation that came with your wireless router.
NOTE: Before connecting to a wireless infrastructure network, ensure that an
Ethernet cable is not connected to the HP All-in-One.
To connect the product with the Wireless Setup Wizard
1. Write down the following information about your access point:
Network Name (also called SSID)
WEP Key, WPA Passphrase (if needed)
If you do not know where to find this information, see the documentation that came
with your wireless access point. You might be able to find the SSID and the WEP key
or WPA passphrase on the Embedded Web Server (EWS) for the access point. For
information on how to open the access point EWS, see the access point
documentation.
NOTE: If the network is set up with an Apple AirPort base station and you are
using a password instead of WEP HEX or WEP ASCII to access this network, you
need to get the equivalent WEP key. See the documentation that came with the
Apple AirPort base station for more information.
2. Press Setup.
3. Press the down arrow button until Network is highlighted, and then press OK.
4. Press the down arrow button to highlight Wireless Setup Wizard, and then press
OK.
This runs the Wireless Setup Wizard. The setup wizard searches for available
networks, and then displays a list of detected network names (SSIDs). The networks
with the strongest signal appear first, the weakest appear last.
5. Press the down arrow button to highlight the name of the network you wrote down in
step 1, and then press OK.
If you do not see your network name in the list
a.Select Enter a New Network Name (SSID). If necessary, use the down arrow
button to highlight it, and then press OK.
The visual keyboard appears.
b. Enter the SSID. Use the arrow buttons on the control panel to highlight a letter or
number on the visual keyboard, and then press OK to select it.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.
Chapter 1
6 Network setup
Network setup
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Photosmart C6340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Photosmart C6340 in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Photosmart C6340

HP Photosmart C6340 User Manual - German, Dutch - 169 pages

HP Photosmart C6340 User Manual - Dutch - 44 pages

HP Photosmart C6340 User Manual - French, Italian - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info