585139
58
Zoom out
Zoom in
Previous page
1/63
Next page
The "Fax Line Condition" test failed
Solution
Make sure you connect the product to an analog phone line or you will not be able to send
or receive faxes. To check if your phone line is digital, connect a regular analog phone to
the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be
a phone line set up for digital phones. Connect the product to an analog phone line and try
sending or receiving a fax.
Check the connection between the telephone wall jack and the product to make sure the
phone cord is secure.
Make sure you have correctly connected the product to the telephone wall jack. Using the
phone cord supplied in the box with the product, connect one end to your telephone wall
jack, then connect the other end to the port labeled 1-LINE on the back of the product. For
more information on setting up the product for faxing, see the printed documentation that
came with the product.
Other equipment, which uses the same phone line as the product, might be causing the test
to fail. To find out if other equipment is causing a problem, disconnect everything except
the product from the phone line, and then run the test again.
If the Fax Line Condition Test passes without the other equipment, then one or more
pieces of the equipment is causing problems; try adding them back one at a time and
rerunning the test each time, until you identify which piece of equipment is causing the
problem.
If the Fax Line Condition Test fails without the other equipment, connect the product
to a working phone line and continue reviewing the troubleshooting information in this
section.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord
connector that plugs into a telephone wall jack.) Try removing the splitter and connecting
the product directly to the telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it passes and the
product is ready for faxing. If the Fax Line Condition Test continues to fail and you experience
problems faxing, contact your telephone company and have them check the phone line.
NOTE: If you are unsure of the kind of phone line you have (analog or digital), check with
your service provider.
The "Dial Tone Detection" test failed
Solution
Other equipment, which uses the same phone line as the product, might be causing the test
to fail. To find out if other equipment is causing a problem, disconnect everything except
the product from the phone line, and then run the test again. If the Dial Tone Detection
Test passes without the other equipment, then one or more pieces of the equipment is
causing problems; try adding them back one at a time and rerunning the test each time,
until you identify which piece of equipment is causing the problem.
Try connecting a working phone and phone cord to the telephone wall jack that you are
using for the product and check for a dial tone. If you do not hear a dial tone, contact your
telephone company and have them check the line.
Make sure you have correctly connected the product to the telephone wall jack. Using the
phone cord supplied in the box with the product, connect one end to your telephone wall
jack, then connect the other end to the port labeled 1-LINE on the back of the product. For
more information on setting up the product for faxing, see the printed documentation that
came with the product.
Chapter 4
56 Troubleshooting and support
Troubleshooting and support
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Photosmart C4340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Photosmart C4340 in the language / languages: English as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Photosmart C4340

HP Photosmart C4340 User Manual - English - 317 pages

HP Photosmart C4340 Quick start guide - English - 8 pages

HP Photosmart C4340 User Manual - German - 53 pages

HP Photosmart C4340 Quick start guide - German, Dutch - 8 pages

HP Photosmart C4340 Quick start guide - French - 8 pages

HP Photosmart C4340 Quick start guide - Italian - 8 pages

HP Photosmart C4340 Quick start guide - Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info