584710
75
Zoom out
Zoom in
Previous page
1/212
Next page
To install the Mac HP All-in-One software
Note The following instructions are for Mac computers only.
1. Quit all applications running on your computer.
2. Insert the Mac CD that came with your HP All-in-One into the CD-ROM drive on
your computer.
3. Double-click the HP All-in-One installer icon.
4. On the Authentication screen, enter the Administrator password used to access
your computer or network.
The installer software looks for HP All-in-One devices, and then lists them.
5. On the Select Device screen, select your HP All-in-One.
6. Follow the onscreen instructions to complete all the installation steps, including
the Setup Assistant.
When you have finished installing the software, your HP All-in-One is ready for
service.
7. To test your network connection, go to your computer and print a self-test report
to your HP All-in-One. For more information, see Print a self-test report.
Connect to additional computers on a network
You can connect your HP All-in-One to more than one computer on a small network of
computers. If your HP All-in-One is already connected to a computer on a network, for
each additional computer you must install the HP All-in-One software, as described in
Install the software for a network connection. During installation of a wireless
connection, the software will discover the SSID (network name) of the existing
network. Once you have set up your HP All-in-One on the network you will not need to
configure it again when you add additional computers.
Note You can have both a wired or wireless connection and a USB
connection to your HP All-in-One. However, you cannot have both a wired and
a wireless connection to the same HP All-in-One.
Change the HP All-in-One from a USB connection to a
network connection
If you first install your HP All-in-One with a USB connection, you can later change to
either a wireless or Ethernet network connection. If you already understand how to
connect to a network, you can use the general directions below. For more detailed
instructions on connecting a HP All-in-One to a network, see Wireless infrastructure
network setup, Wireless ad hoc network setup, or Wired network setup.
Note For optimal performance and security in your wireless network, use an
access point (such as a wireless router) to connect your HP All-in-One.
To change a USB connection to a wireless connection
1. Unplug the USB connection from the back of your HP All-in-One.
2. Press Setup on the control panel of your HP All-in-One.
Chapter 4
72 HP Photosmart 3300 All-in-One series
Network setup
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Photosmart 3310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Photosmart 3310 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Photosmart 3310

HP Photosmart 3310 Installation Guide - English - 16 pages

HP Photosmart 3310 Installation Guide - German - 16 pages

HP Photosmart 3310 User Manual - German - 228 pages

HP Photosmart 3310 Installation Guide - Dutch - 16 pages

HP Photosmart 3310 User Manual - Dutch - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info