472677
179
Zoom out
Zoom in
Previous page
1/241
Next page
During a normal installation of the HP all-in-one software, the following events occur:
1 The HP all-in-one CD-ROM runs automatically.
2 The software installs.
3 Files are copied to your hard drive.
4 You are requested to connect the HP all-in-one to your computer.
5 A green OK and check mark appear on an installation wizard screen.
6 You are requested to restart your computer.
7 The Fax Setup wizard runs.
8 The registration process runs.
If any of these things did not occur, there might be a problem with the installation. To
check the installation on a PC, verify the following:
Start the HP Director and check to make sure the following icons appear: Scan
Picture, Scan Document, Send Fax and HP Gallery. For information on starting
HP Director, see the onscreen HP Image Zone Help that came with your
software. If the icons do not appear immediately, you might need to wait a few
minutes for the HP all-in-one to connect to your computer. Otherwise, see Some of
the icons are missing in the HP Director.
Note If you performed a minimum installation of the software (as apposed to a
typical installation), the HP Image Zone and Copy are not installed and will
not be available from the HP Director.
Open the Printers dialog box and check to see that the HP all-in-one is listed.
Look in the system tray at the far right of the Windows taskbar for an HP all-in-one
icon. This indicates that the HP all-in-one is ready.
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Solution
Do the following:
1 From the Windows Start menu, click Run.
2 In the Run dialog box, enter d:\setup.exe (if your CD-ROM drive is not
assigned to drive letter D, enter the appropriate drive letter), and then click OK.
The minimum system checks screen appears
Solution
Your system does not meet the minimum requirements to install the software. Click
Details to see what the specific problem is, and then correct the problem before
attempting to install the software.
A red X appears on the USB connect prompt
Solution
Normally, a green check appears indicating that the plug and play is successful. A
red X indicates that the plug and play failed.
Do the following:
1 Verify that the control panel overlay is firmly attached, unplug the HP all-in-one
power cord, and then plug it in again.
2 Verify that the USB and power cables are plugged in.
Chapter 16
176 HP Photosmart 2600/2700 series all-in-one
Troubleshooting information
179


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Photosmart 2700 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Photosmart 2700 series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Photosmart 2700 series

HP Photosmart 2700 series User Manual - German - 249 pages

HP Photosmart 2700 series Installation Guide - Dutch - 16 pages

HP Photosmart 2700 series User Manual - Dutch - 239 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info