724183

HP OfficeJet Pro 9012 Manual

173
Zoom out
Zoom in
Previous page
1/216
Next page
● If you are running the test from the Fax Setup Wizard (Windows), make sure the printer is not busy
completing another task, such as receiving a fax or making a copy. Check the display for a message
indicating that the printer is busy. If it is busy, wait until it is nished and in the idle state before running
the test.
● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing. If the Fax Hardware Test continues to fail and you experience problems faxing, contact HP
support. Go to
www.support.hp.com . This website provides information and utilities that can help you correct
many common printer problems. If prompted, select your country/region, and then click All HP Contacts for
information on calling for technical support.
The "Fax Connected to Active Telephone Wall Jack" test failed
● Check the connection between the telephone wall jack and the printer to make sure the phone cord is
secure.
● Connect one end of the phone cord to your telephone wall jack, then connect the other end to the port
labeled
on the back of the printer.
● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
● Try connecting a working phone and phone cord to the telephone wall jack that you are using for the
printer and check for a dial tone. If you do not hear a dial tone, contact your telephone company and
have them check the line.
● Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be
a problem.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing.
The "Phone Cord Connected to Correct Port on Fax" test failed
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs
into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall
jack.
Plug the phone cord into the correct port
1. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the port
labeled on the back of the printer.
NOTE:
If you use the port labeled to connect to the telephone wall jack, you cannot send or receive
faxes. The port labeled should only be used to connect other equipment, such as an answering
machine.
ENWW Get help in this guide 167
… 173 …


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-officejet-pro-9012

Reset search

  • how to replace ink cartridges







































    how to replace ink cartridges



    Submitted on 4-2-2022 at 00:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet Pro 9012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet Pro 9012 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet Pro 9012

HP OfficeJet Pro 9012 User Manual - German - 229 pages

HP OfficeJet Pro 9012 User Manual - Dutch - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info