724182
165
Zoom out
Zoom in
Previous page
1/216
Next page
Adjust the paper-length guide in the input tray to t snugly against all paper. Make sure the paper-
length guide does not bend the paper in the input tray.
Do not force paper too far inside the input tray.
If you are printing on both sides of a page, do not print highly saturated images on light weight paper.
Use paper types that are recommended for the printer.
If the printer is about to run out of paper, allow the printer to run out of paper rst, and then add paper.
Do not load paper when the printer is printing.
When removing the input tray, it is recommended to remove the tray completely from the printer to
make sure no paper is stuck at the rear of the tray. You might need to check the opening in the printer
where the tray was, and reach into the gap to remove any paper.
Solve paper-feed problems
What kind of problem are you having?
Paper is not picked up from a tray
Make sure paper is loaded in the tray. For more information, see Load paper. Fan the paper before
loading.
Make sure the paper-width guides are set to the correct markings in the tray for the paper size you
are loading. Also make sure the paper guides are snug, but not tight, against the stack.
Ensure that the stack of paper is aligned with the appropriate paper size lines on the bottom of the
input tray, and does not exceed the stack height indicated by one or more label on the side or
paper-width guide of the input tray.
Make sure paper in the tray is not curled. Uncurl paper by bending it in the opposite direction of the
curl.
Pages are skewing
Make sure the paper loaded in the input tray is aligned to the paper-width guides. If needed, pull
out the input tray from the printer and reload the paper correctly, making sure that the paper
guides are aligned correctly.
Load paper into the printer only when it is not printing.
Make sure the rear access door is securely shut.
Multiple pages are being picked up
Make sure the paper-width guides are set to the correct markings in the tray for the paper size you
are loading. Also make sure the paper-width guides are snug, but not tight, against the stack.
Ensure that the stack of paper is aligned with the appropriate paper size lines on the bottom of the
input tray, and does not exceed the stack height indicated by one or more label on the side or
paper-width guide of the input tray.
Make sure the tray is not overloaded with paper.
Use HP paper for optimum performance and eiciency.
ENWW Get help in this guide 159
165


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-officejet-pro-9010-series

Reset search

  • Every time scam or junk calls my fax number, as soon as they hear the fax machine emit its tone They hang up The problem is that every time they do that, my machines types up a report and at the end says, NO FAX.
    That’s very obvious but I’m end a with a pile of useless paper and now the ink is very low from doing it. I would like to stop the Report that it useless and only use them when it is a ligimit fax report. I have an HP office jet 9010 All in one Submitted on 16-5-2022 at 00:10

    Reply Report abuse
  • What is that behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:18

    Reply Report abuse
  • What is behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:14

    Reply Report abuse
  • Miten saan asetettua värikasetit? Yritän asettaa, mutta erittäin tiukka, ei mene paikoilleen. Submitted on 24-7-2021 at 14:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet Pro 9010 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet Pro 9010 series in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet Pro 9010 series

HP OfficeJet Pro 9010 series User Manual - German - 229 pages

HP OfficeJet Pro 9010 series User Manual - Dutch - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info