724182
143
Zoom out
Zoom in
Previous page
1/216
Next page
Change network settings
From the printer control panel, you can set up and manage your printer's wireless connection and perform a
variety of network management tasks. This includes viewing and changing network settings, restoring
network defaults, and turning the wireless function on or o.
CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user,
you should not change some of these settings (such as the link speed, IP settings, default gateway, and
rewall settings).
To print network settings
Do one of the following:
From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard. Touch
(Wireless) or (Ethernet) to display the network status screen. Touch Print
Details to print the network conguration page.
From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch
( Setup ), touch Reports , and then touch Network Conguration Page.
To set the link speed
You can change the speed at which data is transmitted over the network. The default is Automatic.
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch ( Setup ), and then touch Network Setup.
2. Touch Ethernet Settings.
3. Select Advanced Settings.
4. Touch Link Speed.
5. Touch the appropriate option that matches your network hardware.
To change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an
advanced user and want to use dierent settings (such as the IP address, subnet mask, or the default
gateway), you can change them manually.
TIP: Before setting a manual IP address, it is recommended to rst connect the printer to the network using
Automatic mode. This allows the router to congure the printer with other needed settings like subnet mask,
default gateway and DNS address.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the
installation, your network components cannot connect with the printer.
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch ( Setup ), and then touch Network Setup.
2. Touch Ethernet Settings or Wireless Settings.
3. Touch Advanced Settings.
ENWW Change network settings 137
143


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-officejet-pro-9010-series

Reset search

  • Every time scam or junk calls my fax number, as soon as they hear the fax machine emit its tone They hang up The problem is that every time they do that, my machines types up a report and at the end says, NO FAX.
    That’s very obvious but I’m end a with a pile of useless paper and now the ink is very low from doing it. I would like to stop the Report that it useless and only use them when it is a ligimit fax report. I have an HP office jet 9010 All in one Submitted on 16-5-2022 at 00:10

    Reply Report abuse
  • What is that behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:18

    Reply Report abuse
  • What is behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:14

    Reply Report abuse
  • Miten saan asetettua värikasetit? Yritän asettaa, mutta erittäin tiukka, ei mene paikoilleen. Submitted on 24-7-2021 at 14:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet Pro 9010 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet Pro 9010 series in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet Pro 9010 series

HP OfficeJet Pro 9010 series User Manual - German - 229 pages

HP OfficeJet Pro 9010 series User Manual - Dutch - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info