724182
122
Zoom out
Zoom in
Previous page
1/216
Next page
Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using either an Ethernet
or wireless connection.
To set up Web Services, use one of the following methods:
To set up Web Services using the printer control panel
1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch
( Setup ).
2. Touch Web Services Setup .
3. Touch Accept to accept the Web Services terms of use and enable Web Services.
4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. If the Printer Update Options screen is displayed, select one of the options.
6. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to nish the setup.
To set up Web Services using the embedded web server
1. Open the EWS. For more information, see Embedded web server.
2. Click the Web Services tab.
3. In the Web Services Settings section, click Setup , click Continue, and follow the onscreen instructions
to accept the terms of use.
4. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: When updates are available, they are automatically downloaded and installed, and then the
printer restarts.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to nish the setup.
To set up Web Services using the HP printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows).
2. In the window that appears, double-click Print, Scan & Fax and then select Printer Home Page (EWS)
under Print. The printer's home page (embedded web server) opens.
3. Click the Web Services tab.
116 Chapter 5 Web Services ENWW
122


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-officejet-pro-9010-series

Reset search

  • Every time scam or junk calls my fax number, as soon as they hear the fax machine emit its tone They hang up The problem is that every time they do that, my machines types up a report and at the end says, NO FAX.
    That’s very obvious but I’m end a with a pile of useless paper and now the ink is very low from doing it. I would like to stop the Report that it useless and only use them when it is a ligimit fax report. I have an HP office jet 9010 All in one Submitted on 16-5-2022 at 00:10

    Reply Report abuse
  • What is that behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:18

    Reply Report abuse
  • What is behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:14

    Reply Report abuse
  • Miten saan asetettua värikasetit? Yritän asettaa, mutta erittäin tiukka, ei mene paikoilleen. Submitted on 24-7-2021 at 14:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet Pro 9010 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet Pro 9010 series in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet Pro 9010 series

HP OfficeJet Pro 9010 series User Manual - German - 229 pages

HP OfficeJet Pro 9010 series User Manual - Dutch - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info